Datasheet
MAX5487/MAX5488/MAX5489
Dual, 256-Tap, Nonvolatile, SPI-Interface,
Linear-Taper Digital Potentiometers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND...........................................................-0.3V to +6.0V
All Other Pins
to GND......................-0.3V to the lower of (V
DD
+ 0.3V) and +6.0V
Maximum Continuous Current into H_, W_, and L_
MAX5487......................................................................±5.0mA
MAX5488......................................................................±1.3mA
MAX5489......................................................................±0.6mA
Continuous Power Dissipation (T
A
= +70°C)
16-Pin TQFN (derate 17.5mW/°C above +70°C) ..........1398mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C).............727mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
DC ELECTRICAL CHARACTERISTICS
(V
DD
= +2.7V to +5.25V, V
H
= V
DD
, V
L
= GND, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at V
DD
= +5.0V,
T
A
= +25°C, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC PERFORMANCE (Voltage-Divider Mode, Figure 1)
Resolution N 256 Taps
Integral Nonlinearity INL (Note 2) ±1 LSB
Differential Nonlinearity DNL (Note 2) ±0.5 LSB
Dual-Code Matching Register A = register B 2 LSB
End-to-End Resistor Tempco TC
R
35 ppm/°C
Ratiometric Resistor Tempco 5 ppm/°C
MAX5487 3.5 6
MAX5488 -0.6 +1.2Full-Scale Error
MAX5489 -0.3 +1.2
LSB
MAX5487 3.5 6
MAX5488 -0.6 1.5Zero-Scale Error
MAX5489 0.3 1
LSB
DC PERFORMANCE (Variable-Resistor Mode, Figure 1)
Resolution 256 Taps
V
DD
= 5.0V ±1.5
Integral Nonlinearity (Note 3)
V
DD
= 3.0V ±3
LSB
V
DD
= 5.0V ±1
Differential Nonlinearity (Note 3)
V
DD
= 3.0V ±1
LSB
DC PERFORMANCE (Resistor Characteristics)
V
DD
= 5.0V 200 350
Wiper Resistance (Note 4) R
W
V
DD
= 3.0V 325 675
Ω
Wiper Capacitance C
W
50 pF
MAX5487 7.5 10 12.5
MAX5488 37.5 50 62.5End-to-End Resistance R
HL
MAX5489 75 100 125
kΩ