Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsInterface ICsInterface IC - multiplexers TQFN 16

The MAX338/MAX339 are monolithic, CMOS analog

multiplexers (muxes). The 8-channel MAX338 is

designed to connect one of eight inputs to a common

output by control of a 3-bit binary address. The dual, 4-

channel MAX339 is designed to connect one of four

inputs to a common output by control of a 2-bit binary

address. Both devices can be used as either a mux or

a demux. On-resistance is 400Ω max, and the devices

conduct current equally well in both directions.

These muxes feature extremely low off leakages (less

than 20pA at +25°C), and extremely low on-channel

leakages (less than 50pA at +25°C). The new design

offers guaranteed low charge injection (1.5pC typ) and

electrostatic discharge (ESD) protection greater than

2000V, per method 3015.7. These improved muxes are

pin-compatible upgrades for the industry-standard

DG508A and DG509A. For similar Maxim devices with

lower leakage and charge injection but higher on-resis-

tance, see the MAX328 and MAX329.

The MAX338/MAX339 operate from a single +4.5V to

+30V supply or from dual supplies of ±4.5V to ±20V.

All control inputs (whether address or enable) are TTL

compatible (+0.8V to +2.4V) over the full specified tem-

perature range and over the ±4.5V to ±18V supply

range. These parts are fabricated with Maxim’s 44V sili-

con-gate process.

________________________Applications

Data-Acquisition Systems Sample-and-Hold Circuits

Test Equipment Heads-Up Displays

Military Radios Communications Systems

Guidance and Control Systems PBX, PABX

____________________________Features

o On-Resistance, <400Ω max

o Transition Time, <500ns

o On-Resistance Match, <10Ω

o NO-Off Leakage Current, <20pA at +25°C

o 1.5pC Charge Injection

o Single-Supply Operation (+4.5V to +30V)

Bipolar-Supply Operation (±4.5V to ±20V)

o Plug-In Upgrade for Industry-Standard

DG508A/DG509A

o Rail-to-Rail Signal Handling

o TTL/CMOS-Logic Compatible

o ESD Protection >2000V, per Method 3015.7

Ordering Information

MAX338/MAX339

8-Channel/Dual 4-Channel,

Low-Leakage, CMOS Analog Multiplexers

________________________________________________________________

Maxim Integrated Products

CMOS DECODE LOGIC

A2 A1 A0 EN

NO8

NO7

NO6

NO5

NO4

NO3

NO2

NO1

COM

V+ V- GND

MAX338 8-CHANNEL SINGLE-ENDED MULTIPLEXER

GND

V+

NO1

V-

TOP VIEW

MAX338

NO5

NO6

NO7

NO8

COM

NO4

NO3

NO2

DIP/SO/QSOP

_____________________Pin Configurations/Functional Diagrams/Truth Tables

19-0272; Rev 4; 4/12

Ordering Information continued at end of data sheet.

Contact factory for dice specifications.

EP = Exposed Pad

***

Contact factory for availability.

Denotes a lead(Pb)-free/RoHS-compliant package.

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Pin Configurations/Functional Diagrams/Truth Tables

continued at end of data sheet.

General Description

PART TEMP RANGE PIN-PACKAGE

MAX338CEE+ 0°C to +70°C

16 QSOP

MAX338CPE+ 0°C to +70°C

16 PDIP

MAX338CSE+ 0°C to +70°C

16 Narrow SO

MAX338C/D 0°C to +70°C

Dice*

MAX338EEE+ -40°C to +85°C

16 QSOP

MAX338ETE+ -40°C to +85°C

16 TQFN-EP**

(5mm x 5mm)

Summary of content (13 pages)

PAGE 1
9-0272; Rev 4; 4/12 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ____________________________Features The MAX338/MAX339 are monolithic, CMOS analog multiplexers (muxes). The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4channel MAX339 is designed to connect one of four inputs to a common output by control of a 2-bit binary address. Both devices can be used as either a mux or a demux.
PAGE 2
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ ............................................................................-0.3V, 44V GND .........................................................................-0.3V, 25V Digital Inputs, NO, COM (Note 1)...........(V- - 2V) to (V+ + 2V) or 30mA (whichever occurs first) Continuous Current (any terminal) ......................................
PAGE 3
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers (V+ = +15V, V- = -15V, VGND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS INPUT Input Current with Input Voltage High IAH VA = 2.4V or 15V -1.0 Input Current with Input Voltage Low IAL VEN = 0V or 2.4V, VA = 0V -1.0 SUPPLY Power-Supply Range ±4.5 VEN = VA = 0V Positive Supply Current Negative Supply Current I+ I- VEN = 2.4V, VA(ALL) = 2.
PAGE 4
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ELECTRICAL CHARACTERISTICS—Single Supply (V+ = +12V, V- = 0V, VGND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX (Note 2) UNITS SWITCH Analog Signal Range On-Resistance VNO, VCOM RON (Note 3) INO = 0.2mA VCOM = 3V or 10V 0 12 V TA = +25°C 460 650 Ω TA = +25°C 210 500 ns TA = +25°C 280 500 ns TA = +25°C 110 500 ns TA = +25°C 1.
PAGE 5
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ON-RESISTANCE vs. VCOM (DUAL SUPPLIES) V+ = +15V V- = -15V +125°C 1200 300 ±15V 200 RON (Ω) ±10V 300 +25°C 200 ±20V 600 +15V 400 100 +20V 200 0 0 -10 -5 0 5 10 15 20 -15 -10 -5 VCOM (V) +25°C -55°C 200 V+ = +15V V- = -15V 1 ICOM (OFF) 0.1 0 15 1 0.1 ICOM(ON) INO (OFF) 0.001 0.
PAGE 6
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ______________________________________________________________Pin Description PIN MAX338 NAME MAX339 DIP/SO/QSOP FUNCTION DIP/SO/QSOP TQFN-EP TQFN-EP 1, 15, 16, 15, 14, 13 — — A0, A2, A1 Address Inputs — — 1, 16 15, 14 A0, A1 Address Inputs 2 16 2 16 EN Enable 3 1 3 1 V- Negative-Supply Voltage Input 4–7 2–5 — — NO1–NO14 — — 4–7 2–5 NO1A–NO4A Analog Inputs—Bidirectional 8 6 — — COM A
PAGE 7
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers +15V V+ ±10V NO1 A2 A1 NO2-NO7 A0 MAX338 NO8 EN +10V COM GND VOUT V- LOGIC INPUT 10pF 50Ω -15V VNO1 V+ SWITCH OUTPUT VOUT ±10V NO1B A1 50% 0V 1kΩ +15V 90% 0V A0 90% NO1A-NO4A EN VNO8 NO4B MAX339 +10V tTRANS COMB V- GND tr < 20ns tf < 20ns +3V 50Ω tTRANS ON VOUT ON 10pF 1kΩ -15V Figure 2.
PAGE 8
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers _________________________________Test Circuits/Timing Diagrams (continued) +15V +2.4V V+ EN NO1-NO8 +5V tr < 20ns tf < 20ns +3V LOGIC INPUT 50% 0V A0 A1 VOUT MAX338 80% A2 COM GND SWITCH OUTPUT VOUT V- 10pF tOPEN 0V 1kΩ 50Ω -15V Figure 4.
PAGE 9
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers +15V +15V VOUT VIN NO1 RS = 50Ω V+ COM A1 MAX338 EN 10nF OFF ISOLATION = 20log VOUT RL= 1kΩ NO8 RS = 50Ω A0 MAX338 COM A1 RL 1kΩ A2 GND V+ NO1 NO2 NO8 A0 10nF 10nF A2 V- GND EN 10nF -15V VOUT CROSSTALK = 20log VIN Figure 6. Off-Isolation V- -15V VOUT VIN Figure 7. Crosstalk +15V V+ NO1 A2 CHANNEL SELECT METER MAX338 A1 NO8 A0 GND EN COM V- IMPEDANCE ANALYZER f = 1MHz -15V Figure 8.
PAGE 10
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ________Pin Configurations/Functional Diagrams/Truth Tables (continued) V+ V- GND TOP VIEW NO1A + 16 A1 NO2A EN 2 15 GND NO3A V- 3 14 V+ NO4A A0 1 MAX339 NO1A 4 13 NO1B NO2A 5 12 NO2B NO3A 6 11 NO3B COMA NO1B NO2B COMB NO3B NO4A 7 10 N04B COMA 8 9 COMB NO4B CMOS DECODE LOGIC DIP/SO/QSOP A1 EN A0 MAX339 DUAL 4-CHANNEL MULTIPLEXER A2 A1 A0 EN ON SWITCH X 0 0 0 0 1 X 0 0 1 1 0 X 0 1 0 1 0
PAGE 11
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers TOP VIEW + V- 1 NO1 EN A0 A1 A2 16 15 14 13 + LOGIC 12 GND 2 11 NO2 3 NO3 4 EN A0 A1 GND 16 15 14 13 LOGIC 12 V+ 2 11 NO1B NO2A 3 10 NO2B NO3A 4 9 NO3B V- 1 V+ NO1A 10 NO5 9 NO6 *EP *EP 5 6 7 8 5 6 7 8 NO4 COM NO8 NO7 NO4A COMA COMB NO4B MAX339 TQFN-EP MAX338 TQFN-EP *CONNECT EP TO V+ Ordering Information (continued) PART TEMP RANGE PIN-PACKAGE MAX339EEE+ -40°C to +85°C
PAGE 12
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers Package Information For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 12 PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO.
PAGE 13
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers REVISION NUMBER REVISION DATE 4 4/12 DESCRIPTION Added the MAX338CEE+ / MAX338EEE+/ MAX338MSE /PR3 / MAX339CEE+ / MAX339EEE+ part and packaging information PAGES CHANGED 1, 2, 6, 10, 11 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.