Datasheet

(Voltage Referenced to V-)
V+ ......................................................................... -0.3V, +44V
GND ...................................................................... -0.3V, +25V
Digital Inputs, NO, COM (Note 1) ........ (V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal) .....................................30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (T
A
= +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C) ............727mW
Wide SO (derate 12.50mW/°C above +70°C) ...........1000mW
PLCC (derate 10.53mW/°C above +70°C) ..................842mW
CERDIP (derate 16.67mW/°C above +70°C) ............1333mW
TSSOP (derate 12.8mW/°C above +70°C) ...............1025mW
Operating Temperature Ranges
MAX30_C_ _ ......................................................0°C to +70°C
MAX30_E_ _ .................................................. -40°C to +85°C
MAX30_MJI .................................................. -55°C to +125°C
Storage Temperature Range ............................ -65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow)
PDIP, Wide SO, TSSOP lead(Pb)-free ........................+260°C
PDIP, Wide SO, TSSOP containing lead(Pb) ..............+240°C
PLCC lead(Pb)-free .....................................................+245°C
PLCC containing lead(Pb) ...........................................+225°C
CERDIP .......................................................................+240°C
(V+ = +15V, V- = -15V, GND = 0V, V
AH
= +2.4V, V
AL
= +0.8V, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN
TYP
(Note 2)
MAX UNITS
SWITCH
Analog Signal Range
V
NO
,
V
COM
(Note 3) -15 +15 V
On-Resistance R
ON
I
NO
= -1.0mA,
V
COM
= ±10V
T
A
= +25°C 60 100
Ω
T
A
= T
MIN
to T
MAX
125
On-Resistance Matching
Between Channels
ΔR
ON
I
NO
= -1.0mA,
V
COM
= ±10V (Note 4)
T
A
= +25°C 1.5 5
Ω
T
A
= T
MIN
to T
MAX
8
On-Resistance Flatness R
FLAT
I
NO
= -1.0mA,
V
COM
= ±5V or 0V
T
A
= +25°C 1.8 7
Ω
T
A
= T
MIN
to T
MAX
10
NO Off-Leakage Current
(Note 5)
I
NO(OFF)
V
COM
= +10V,
V
NO
= ±10V,
V
EN
= 0V
T
A
= +25°C -0.5 +0.01 +0.5
nA
T
A
= T
MIN
to T
MAX
C, E -2.5 +2.5
M -5.0 +5.0
COM Off-Leakage Current
(Note 5)
I
COM(OFF)
V
NO
= ±10V,
V
COM
= +10V,
V
EN
= 0V
MAX306
T
A
= +25°C -0.75 +0.02 +0.75
nA
T
A
= T
MIN
to T
MAX
C, E -20 +20
M -40 +40
V
NO
= +10V,
V
COM
= ±10V,
V
EN
= 0V
MAX307
T
A
= +25°C -0.75 +0.02 +0.75
T
A
= T
MIN
to T
MAX
C, E -10 +10
M -20 +20
MAX306/MAX307 Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
www.maximintegrated.com
Maxim Integrated │ 2
Note 1: Signals on NO, COM, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to
maximum current ratings.
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics—Dual Supplies