Datasheet

MAX220–MAX249
+5V-Powered, Multichannel RS-232
Drivers/Receivers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS—MAX220/222/232A/233A/242/243
ELECTRICAL CHARACTERISTICS—MAX220/222/232A/233A/242/243
(V
CC
= +5V ±10%, C1–C4 = 0.1µF‚ MAX220, C1 = 0.047µF, C2–C4 = 0.33µF, T
A
= T
MIN
to T
MAX
‚ unless otherwise noted.)
Note 1: For the MAX220, V+ and V- can have a maximum magnitude of 7V, but their absolute difference cannot exceed 13V.
Note 2: Input voltage measured with T
OUT
in high-impedance state, SHDN or V
CC
= 0V.
Note 3: Maximum reflow temperature for the MAX233A is +225°C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Supply Voltage (V
CC
) ...............................................-0.3V to +6V
V+ (Note 1) ..................................................(V
CC
- 0.3V) to +14V
V- (Note 1) .............................................................+0.3V to +14V
Input Voltages
T
IN
..............................................................-0.3V to (V
CC
- 0.3V)
R
IN
(Except MAX220) ........................................................±30V
R
IN
(MAX220).....................................................................±25V
T
OUT
(Except MAX220) (Note 2) .......................................±15V
T
OUT
(MAX220)...............................................................±13.2V
Output Voltages
T
OUT
...................................................................................±15V
R
OUT
.........................................................-0.3V to (V
CC
+ 0.3V)
Driver/Receiver Output Short Circuited to GND.........Continuous
Continuous Power Dissipation (T
A
= +70°C)
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C)..842mW
18-Pin Plastic DIP (derate 11.11mW/°C above +70°C)..889mW
20-Pin Plastic DIP (derate 8.00mW/°C above +70°C) ..440mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin Wide SO (derate 9.52mW/°C above +70°C)......762mW
18-Pin Wide SO (derate 9.52mW/°C above +70°C)......762mW
20-Pin Wide SO (derate 10.00mW/°C above +70°C)....800mW
20-Pin SSOP (derate 8.00mW/°C above +70°C) ..........640mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C).....800mW
18-Pin CERDIP (derate 10.53mW/°C above +70°C).....842mW
Operating Temperature Ranges
MAX2_ _AC_ _, MAX2_ _C_ _.............................0°C to +70°C
MAX2_ _AE_ _, MAX2_ _E_ _ ..........................-40°C to +85°C
MAX2_ _AM_ _, MAX2_ _M_ _.......................-55°C to +125°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) (Note 3) ...................+300°C
PARAMETER CONDITIONS
MIN
TYP
MAX
UNITS
RS-232 TRANSMITTERS
Output Voltage Swing All transmitter outputs loaded with 3kΩ to GND ±5 ±8 V
Input Logic Threshold Low 1.4 0.8 V
All devices except MAX220 2 1.4
Input Logic Threshold High
MAX220: V
CC
= 5.0V
2.4
V
All except MAX220, normal operation 5 40
Logic Pullup/lnput Current
SHDN = 0V, MAX222/MAX242, shutdown,
MAX220
±0.01
±1
µA
V
CC
= 5.5V, SHDN = 0V, V
OUT
= ±15V,
MAX222/MAX242
±0.01
±10
V
OUT
= ±15V
±0.01
±10
Output Leakage Current
V
CC
= SHDN = 0V
MAX220, V
OUT
= ±12V ±25
µA
Data Rate 200 116 kbps
Transmitter Output Resistance V
CC
= V+ = V- = 0V, V
OUT
= ±2V
300 10M
Ω
V
OUT
= 0V ±7 ±22
Output Short-Circuit Current V
OUT
= 0V
MAX220 ±60
mA
RS-232 RECEIVERS
±30
RS-232 Input Voltage Operating Range
MAX220 ±25
V
All except MAX243 R2
IN
0.8
1.3
RS-232 Input Threshold Low V
CC
= 5V
MAX243 R2
IN
(Note 4) -3
V
All except MAX243 R2
IN
1.8 2.4
RS-232 Input Threshold High V
CC
= 5V
MAX243 R2
IN
(Note 4) -0.5 -0.1
V