Datasheet

+5V, RS-232 Transceivers
with 0.1µF External Capacitors
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
V
CC
..........................................................................-0.3V to +6V
V+
.............................................................. (V
CC
- 0.3V) to +14V
V- ...........................................................................+0.3V to -14V
Input Voltages
T
IN
......................................................... -0.3V to (V
CC
+ 0.3V)
R
IN
................................................................................... Q30V
Output Voltages
T
OUT
.................................................(V+ + 0.3V) to (V- - 0.3V)
R
OUT
..................................................... -0.3V to (V
CC
+ 0.3V)
Short-Circuit Duration
T
OUT
.......................................................................Continuous
Continuous Power Dissipation (T
A
= +70NC)
14-Pin Plastic DIP (derate 10.00mW/NC above +70NC)
...800mW
16-Pin Plastic DIP (derate 10.53mW/NC above +70NC)
...842mW
16-Pin SO (derate 8.70mW/NC above +70NC)
.............696mW
16-Pin Wide SO (derate 9.52mW/NC above +70NC)
....762mW
16-Pin CERDIP (derate 10.00mW/NC above +70NC)
...800mW
20-Pin Plastic DIP (derate 11.11mW/NC above +70NC)
...889mW
20-Pin Wide SO (derate 10.00mW/NC above +70NC) ..800mW
20-Pin CERDIP (derate 11.11mW/NC above +70NC)
...889mW
24-Pin Narrow Plastic DIP
(derate 13.33mW/NC above +70NC)
.......................1067mW
24-Pin Wide Plastic DIP
(derate 9.09mW/NC above +70NC)
...........................727mW
24-Pin Wide SO (derate 11.76mW/NC above +70NC)
..941mW
24-Pin SSOP (derate 8.00mW/NC above +70NC)
.........640mW
24-Pin CERDIP (derate 12.50mW/NC above +70NC)
.1000mW
28-Pin Wide SO (derate 12.50mW/NC above +70NC)
1000mW
28-Pin SSOP (derate 9.52mW/NC above +70NC)
.........762mW
Operating Temperature Ranges
MAX2_ _C_ _
...................................................... 0NC to +70NC
MAX2_ _E_ _
................................................... -40NC to +85NC
MAX2_ _ M_ _
............................................... -55NC to +125NC
Storage Temperature Range
............................ -65NC to +160NC
Lead Temperature (soldering, 10s) (Note 1)
..................+300NC
Note 1:
Maximum reflow temperature for the MAX203 and MAX205 is +225°C.
ELECTRICAL CHARACTERISTICS
(MAX202/MAX204/MAX206/MAX208/MAX211/MAX213: V
CC
= +5V Q10%; MAX200/MAX203/MAX205/MAX207: V
CC
= +5V Q5%,
C1–C4 = 0.1FF; MAX201/MAX209: V
CC
= +5V Q10%, V+ = +9.0V to +13.2V, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
PARAMETER CONDITIONS MIN TYP MAX UNITS
Output-Voltage Swing
All transmitter outputs loaded with 3kI to ground Q5 Q8
V
V
CC
Power-Supply
Current
No load, T
A
= +25NC
MAX202, MAX203 8 15
mA
MAX200, MAX204–MAX208, MAX211,
MAX213
11 20
MAX201, MAX209 0.4 1
V+ Power-Supply Current No load
MAX201 5 10
mA
MAX209 7 15
Shutdown Supply Current
Figure 1, T
A
= +25NC
MAX200, MAX205, MAX206, MAX211 1 10
FA
MAX213 15 50
Input Logic Threshold
Low
T
IN
, EN, SHDN, EN, SHDN
0.8 V
Input Logic Threshold
High
T
IN
2.0
V
EN, SHDN, EN, SHDN
2.4
Logic Pullup Current T
IN
= 0V 15 200
FA
RS-232 Input-Voltage
Operating Range
-30 +30 V
MAX200–MAX209/MAX211/MAX213
2
Maxim Integrated