Datasheet

MAX1749
SOT23 Vibrator Motor Driver
_______________________________________________________________________________________ 7
Capacitor Selection and
_________________Regulator Stability
Use a 1µF capacitor on the input and a 1µF capacitor
on the output of the MAX1749. A higher-value input
capacitor (10µF) may be necessary if large, fast tran-
sients are anticipated and the device is located several
inches from the power source. Improve load-transient
response and stability by using larger output capaci-
tors. For stable operation over the full temperature
range with load currents up to 120mA, use a 1µF min
capacitor (ESR < 0.2Ω).
Chip Information
TRANSISTOR COUNT: 148
________________________________________________________Package Information
SOT5L.EPS