Datasheet

MAX16060/MAX16061/MAX16062
1% Accurate, Quad-/Hex-/Octal-Voltage
µP Supervisors
4
______________________________________________________________________________________________________________________________________________________________________________
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
WATCHDOG TIMER
WDI Input-Voltage Low V
IL
0.3 x
V
CC
V
WDI Input-Voltage High V
IH
0.7 x
V
CC
V
WDI Pulse Width (Note 5) 50 ns
Watchdog Timeout Period t
WDI
1.12 1.60 2.40 s
Watchdog Startup Period 35 54 72 s
Watchdog Input Current V
WDI
= 0 to V
CC
(Note 5) -1 +1 µA
DIGITAL LOGIC
TOL Input-Voltage Low V
IL
0.3 x
V
CC
V
TOL Input-Voltage High V
IH
0.7 x
V
CC
V
TOL Input Current TOL = V
CC
100 nA
MARGIN Input-Voltage Low V
IL
0.3 x
V
CC
V
MARGIN Input-Voltage High V
IH
0.7 x
V
CC
V
MARGIN Pullup Resistance Pulled up to V
CC
12 20 28 kΩ
MARGIN Delay Time t
MD
Rising or falling (Note 6) 50 µs
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= 2.0V to 5.5V, T
A
= -40°C to +125°C, unless otherwise specified. Typical values are at V
CC
= 3.3V, T
A
= +25°C). (Note 1)
Note 1: Devices are tested at T
A
= +25°C and guaranteed by design for T
A
= T
MIN
to T
MAX
.
Note 2: The outputs are guaranteed to remain asserted down to V
CC
= 1V.
Note 3: Measured with WDI, MARGIN, and MR unconnected.
Note 4: The minimum and maximum specifications for this parameter are guaranteed by using the worst case of the SRT ramp cur-
rent and SRT threshold specifications.
Note 5: Guaranteed by design and not production tested.
Note 6: Amount of time required for logic to lock/unlock outputs from margin testing.