Datasheet

PIN
NAME FUNCTION
MAX1300 MAX1301
1 2 AVDD1
Analog Supply Voltage 1. Connect AVDD1 to a +4.75V to +5.25V power-supply voltage. Bypass
AVDD1 to AGND1 with a 0.1µF capacitor.
2 3 CH0 Analog Input Channel 0
3 4 CH1 Analog Input Channel 1
4 5 CH2 Analog Input Channel 2
5 6 CH3 Analog Input Channel 3
6 — CH4 Analog Input Channel 4
7 — CH5 Analog Input Channel 5
8 — CH6 Analog Input Channel 6
9 — CH7 Analog Input Channel 7
10 7
CS
Active-Low Chip-Select Input. When CS is low, data is clocked into the device from DIN on the
rising edge of SCLK. With CS low, data is clocked out of DOUT on the falling edge of SCLK.
When CS is high, activity on SCLK and DIN is ignored and DOUT is high impedance.
11 8 DIN
Serial Data Input. When CS is low, data is clocked in on the rising edge of SCLK. When CS is
high, transitions on DIN are ignored.
12 9 SSTRB
Serial-Strobe Output. When using the internal clock, SSTRB rising edge transitions indicate that
data is ready to be read from the device. When operating in external clock mode, SSTRB is
always low. SSTRB does not tri-state, regardless of the state of CS, and therefore requires
a dedicated I/O line.
13 10 SCLK
Serial Clock Input. When CS is low, transitions on SCLK clock data into DIN and out of DOUT.
When CS is high, transitions on SCLK are ignored.
14 11 DOUT
Serial Data Output. When CS is low, data is clocked out of DOUT with each falling SCLK
transition. When CS is high, DOUT is high impedance.
15 12 DGNDO Digital I/O Ground. DGND, DGNDO, AGND3, AGND2, and AGND1 must be connected together.
16 13 DGND Digital Ground. DGND, DGNDO, AGND3, AGND2, and AGND1 must be connected together.
17 14 DVDDO
Digital I/O Supply Voltage Input. Connect DVDDO to a +2.7V to +5.25V power-supply voltage.
Bypass DVDDO to DGNDO with a 0.1µF capacitor.
18 15 DVDD
Digital-Supply Voltage Input. Connect DVDD to a +4.75V to +5.25V power-supply voltage.
Bypass DVDD to DGND with a 0.1µF capacitor.
19 16 REFCAP
Bandgap-Voltage Bypass Node. For external reference operation, connect REFCAP to AVDD.
For internal reference operation, bypass REFCAP with a 0.01µF capacitor to AGND1
(V
REFCAP
≈ 4.096V).
20 17 REF
Reference-Buffer Output/ADC Reference Input. For external reference operation, apply an
external reference voltage from 3.800V to 4.136V to REF. For internal reference operation,
bypassing REF with a 1µF capacitor to AGND1 sets V
REF
= 4.096V ±1%.
MAX1300/MAX1301 8- and 4-Channel, ±3 x V
REF
Multirange Inputs,
Serial 16-Bit ADCs
www.maximintegrated.com
Maxim Integrated │ 12
Pin Description