Datasheet

DS2740
Table 1. ORDERING INFORMATION
PART MARKING DESCRIPTION
DS2740U D2740
15-Bit Current Resolution, 8-Pin μMAX
DS2740U+ D2740 (see note)
15-Bit Current Resolution, Lead-Free 8-Pin μMAX
DS2740U/T&R D2740
15-Bit Current Resolution, 8-Pin μMAX, Tape-and-Reel
DS2740U+T&R D2740 (see note)
15-Bit Current Resolution, Lead-Free 8-Pin μMAX, Tape-
and-Reel
DS2740BU 2740B
13-Bit Current Resolution, 8-Pin μMAX
DS2740BU+ 2740B (see note)
13-Bit Current Resolution, Lead-Free 8-Pin μMAX
DS2740BU/T&R 2740B
13-Bit Current Resolution, 8-Pin μMAX, Tape-and-Reel
DS2740BU+T&R 2740B (see note)
13-Bit Current Resolution, Lead-Free 8-Pin μMAX, Tape-
and-Reel
Note: A “+” will also be marked on the package next to the pin 1 indicator.
DESCRIPTION
The DS2740 provides high-precision current-flow measurement data to support battery-capacity
monitoring in cost-sensitive applications. Current is measured bidirectionally over a dynamic range of 15
bits (DS2740U) or 13 bits (DS2740BU), with the net flow accumulated in a separate 16-bit register.
Through its 1-Wire interface, the DS2740 allows the host system read/write access to status and current
measurement registers. Each device has a unique factory-programmed 64-bit net address that allows it to
be individually addressed by the host system, supporting multibattery slot operation. The interface can be
operated with standard or overdrive timing.
Although the DS2740 is primarily intended for location on the host system, it is also suited for mounting
in the battery pack. The DS2740 and FuelPack™ algorithms, along with host measurements of
temperature and voltage, form a complete and accurate solution for estimating remaining capacity.
FuelPack is a trademark of Dallas Semiconductor.
2 of 16