WIRE CONNECTION DIAGRAM Wires encl safely standstills are recommenced io congest the supplementary, CAUTION: Risk of five L -N CANOPY INSTALLATION INSTRUCTIONS Please read all inshuctinns:Carsfully, Before you proceed tr install, make Sure halt ihe power supply 8 brigand Gif and reading off until installation is complete. Please note halt sate par bas been assigned a letter Please prices nan alphabetical order. #. Existing Dialectical Box B, Harass © Crossbar Screws 1, Sanctioned E.
Assembly and Installation Steps Step 6 Attach the loop 16 the hook. Step 3 Once the black wire is pulled out, pass it through the hook and round metal part in sequence, Step 1 "The black wire needs “fo pass through the rod. Step 4 4A. Attach the 3 wires with writings together. Tighten the wires using the wiring cap. Cover the wiring caps using the insulated rubber tape. 4B, Attach the 3 wires with no writing together. Tighten the wires using the wiring cap.
Assembly and Installation Steps Please note: The parts in this table are completely assembled for illustrative purpose. In the actual product that you receive, some parts are assembled and attached together. ~ Step 7 TA: Lock the crossbar to the junction box of the ceiling by using 2 pos of 5/32 screws in the accessories bag. 78. Connect the wires. The photosensitive wire is the one which has writing on |, The negative () wire is this one which has no writing. 7C.