/ WIRE CONNECTION DIAGRAM Wires met safety standards are recommended to concert the supply circuit. CAUTION: Risk of fire N —— CANOPY INSTALLATION INSTRUCTIONS Lasagna read all instructions carefully, Befog you process 1 install, make Sire halt the power supply Is ned off and reaming ff until installation 1B complete.
Assembly and Installation Steps Step 4 Please note that'll! First install the shortest wire, then install the longer wire, Install 10 wires in turn. The wire gods trough the plastic part and ten through the disc. Step 3 Open Step 5 7 Adjust the height of the line Plastic part for rear lock, Main wire © Step 7 A Install 16 G9 bulbs (Not included). Step 6 Step 1 AS lines marked with | and the lead marked with 1 shall:be screwed together, screwed with 1. Boru out the fight socket ring from the socket. 2.
Assembly and installation Steps Step 7 1. Lock the crossbar fo the junction box of the ceiling by using 2 pos of 5/32 resews in the accessories bag. 2. Connect ite wings. The hot positive wire is the one which has writing on it. The negative wire {3 the one which has no writing. Step 8 Please rote: The parts in this table are completely assembled for Illustrative purpose. In the actual product that you receive, some parts are assembled and attached together. .