Instructions / Assembly

Installation Instructions

Model: M-SF 9001

1. Remove your existing shower head.

2. Wrap the Teflon tape provided approximately four times on

thread.

3. Screw the shower head onto the threads by rotating until

firmly place.

4. Wrap the Teflon tape around the thread of the water pipe.

5. Connect the swivel collar to the water pipe by rotating the

swivel collar serval turns.

6. Once hand tightened, use pliers to tighten the swivel collar

until the shower filter is firmly in place.

BENEFITS

- Eliminates toxic fumes and odors

- Avoids dry skin, flaky scalp, dandruff and fading colored hair

- Strong chlorine removal, Up to 99% from 17 ounces of KDF-55

-Lasts 8 to 12 months.

- Fits all showers.

PAGE 1
Installation Instructions Model: M-SF 9001 1. Remove your existing shower head. 2. Wrap the Teflon tape provided approximately four times on thread. 3. Screw the shower head onto the threads by rotating until firmly place. 4. Wrap the Teflon tape around the thread of the water pipe. 5. Connect the swivel collar to the water pipe by rotating the swivel collar serval turns. 6. Once hand tightened, use pliers to tighten the swivel collar until the shower filter is firmly in place.
PAGE 2
No plumbing required Chlorine is a toxic element used to chemically disinfect water. However, Chlorine strips protein from skin and hair leaving it dry and itchy. Filtering out Chlorine from shower water will avoid dry skin and hair, reduce flaking scalp as well as eyes and lungs irritation. Chlorine exposure from showering is greater than the total exposure from drinking 8 glasses of unfiltered tap water each day. Filtering also helps control bacteria, mold and mildew.