Instructions / Assembly

WALL ART INSTALLATION
Whatever your application, there is a simple installation method to provide the flexibility and ease of
installation you need to create your outdoor masterpiece. Installation in a flat (ceiling) position is not
recommended and any resulting distortion will not be covered by the warranty. Installing MATRIX Wall
Art panels using one of our recommended methods will ensure a professional and durable finish.
Note: Our 15-year Warranty only applies when th
e panel has been instal
led in accordance with our
installation instructions.
Detailed installation instructions can be downloaded from Matrixscreens.com; these instructions
must be carefully followed in accordance with the warranty conditions.
Installation Options
There are several simple installation options that will ensure a professional and durable finish:
Using a wire rope or string. Mark the center of the
panel on the back using a tape measure, then mark
screw positions equal distance from the
center. Secure
the wire rope or
string to the panel by using short screws
up to 1/4” long.
Using the MATRIX Screen Mounting Kit or screws
and washers – holes in the panel must be larger than the
screws by 3/16” to allow for expansion and contraction
with changes in temperature. Do not overtighten screws
to allow the panel to expand and contract.
Using spacers to set the panel off the wall or fence
will create a more 3-dimensional installation with s
hadow
effects. Backlighting
can be used to further enhance this
effect. Holes in the panel must be 3/16” larger than the
screws.
Within a timber frame with grooved timbers or beading. Use 1/2" minimum groove depth and
allow 3/16” for thermal expansion.
5/16”
5/16”
3/16”
3/16”
15 Year Manufacturer's Warranty
Design Flow Pty Ltd warrants to the original purchaser that Matrix screening, fencing and flooring products will be free of
structural faults due to defects in manufacturing for a period not exceeding 15 years from the date of purchase.
Whilst the color formulation of the materials has been designed to withstand many years of exposure to the sun and weather,
the warranty does not cover natural fading or a reduction of material properties over time.
This warranty is only valid where the product has been installed according to the manufacturer's installation instructions.
All warranty matters are to be referred through the original place of purchase. Valid warranty claims will be settled by either full
replacement or satisfactory repair of the faulty product.
Warranties and remedies including compensation for consequential or direct losses, other than those set out above are hereby
excluded, except to the extent where to so exclude would contravene any law (including the Trade Practices Act (Cth. 1974) or
cause any part of this warranty to be void.
OUTDECO USA
2045 Corte Del Nogal
Carlsbad CA 92011
P: 760-444-4193
E: [e-mail]