User Manual - Ring Light

Matrix Light ML-115R LED Ring Light ••• 20
3. Insert the L-bracket slide (ML-SL30 or ML-SL15) into the hole of the Tripod
Adapter and tighten the fastening screw. Hook the battery on to the slide
and connect it to the light with the power cable (ML-PC1).
4. If required, extra attachments can be used with the Tripod Adapter and
the Slide in place, utilizing the threaded nut at the bottom of the Adapter.
⚠ CAUTION: It is possible to damage the attachment points on the camera as well as the adapter
when excessive load is placed on the slide. To reduce this risk always adjust the
slide as short as possible.
⚠ CAUTION: Always minimize the slide length before attaching it on to a tripod
⚠ CAUTION: When you move camera attached on the tripod with ML-AT1, please hold the
tripod’s legs, not holding camera. Or the ML-AT1 may get damaged by the weight
of the heavy tripod.