Farmhouse Kitchen Sink * Premium grade handmade sink * 16 gauge Stainless Steel 304 * Vertical angle cornerstone radius coves corner * Best-in-breed sound and thermal insulation * Limited lifetime warranty In Accordance with [Industry Codes & Standards for USA & Canada All Stainless Kitchen Sinks are Certified & Listed By cup C. CAUTION Due to the weight and sharp edges of the sink, exercise caution when handling, moving or lifting the box or the sink.
TOOLS | Safety glasses / maker / silicone adhesive sealant/ tape measure / Jigsaw / rags / wood braces / level / screws / | bladed screwdriver : Measure the height of apron sink, cut cabinet front cutout and counter top cutout accordingly. : Make a proper frame under to support the farmhouse sink. Cut two support farmings to extend along the inner walls of the cabinet on each side of the base.
+ Make sure there is a proper spacing for sink before gluing and inserting screws into the wood and cabinet. Fi SL 35TH-30 03 : Position and fixing the supports with screws .
: Remove the sink. : Place the sink onto the support and adjust proper position. Sink should be positioned at least 4” between the back of the cabinet to allow faucet installation.
: Then cover the counter top on the sink. Te =| Ts Install the secure clips to the counter top, make sure each clip engages with the rim of the sink (minimum 4 clips in back, 2 clips per side). Tighten each clips evenly. : Complete counter top installation and wipe away any excess caulk from the sink rim. « Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer's instructions + Run water into sink and check for leaks.
MAINTENANCE INSTRUCTIONS FAQs 1. Why is there rust in my new kitchen sink? Reasons: 1.1 The rust may be caused by the welding cement, or oil residue on the sink which when not cleaned on time can lead the sink to rust. 1.2 Chemical cleaning agent, paint, sauces or cooking oil left in the kitchen sink after a certain period, these will create molds and the molds would stick on the surface. Prevention and Treatments: 1.
DO 1. Daily Use, Daily Clean! Use soft towel to keep the sink bowl! dry. 2. Clean up as soon as possible once used any chemical or corrosion products. 3. The sink is brushed finish, pls wipe it along with the brushed direction DO NOT 1. Leave water spots, utensils or steel cool-ware in the sink for a long time, which would become rust spots on your sink surface. 2. Leave cleaning agents or bleach sitting in your sink for a long period of time which may cause the sink discolor or damage the surface. 3.