20 Volt Portable Band Saw 241-0440 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374. (M-F 8am – 6pm EST.
table of contents Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview / Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
safety symbols Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
safety INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
safety INSTRUCTIONS WARNING: Read all safety warnings and instructions.Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WARNING: Risk of fire and electric shock. Dry location use only. Do not expose to rain. Risk of injury. Work area safety 1.
safety INSTRUCTIONS 4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
safety INSTRUCTIONS Service 1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SPECIFIC SAFETY RULES FOR RECIPROCATING SAW 1. Use battery only with charger listed. Battery pack 252-8024 252-8028 252-8029 252-8030 252-8031 252-8032 252-8033 252-8034 Charger 252-8036 252-8037 252-8044 DANGER: Keep hands away from cutting area and blade.
OVERVIEW Lock-off button Trigger switch Blade tightening lever Side handle Work steady rest Blade holder Blade SPECIFICATIONS PRODUCT SPECIFICATIONS No load Speed 550FPM Blade Size 28-13/16" Length 1/2" Width .020" Thickness Cutting capacity Round piece Dia. 2-1/2” Or Rectangle piece 2-1/2” x 2-1/2” Saw Weight (without battery) 5lbs. 15oz.
ASSEMBLY WARNING: If any part is broken or missing, do not attempt to attach the battery or operate the saw until the broken or missing parts are replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this saw or create accessories not recommended for use with this saw. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
OPERATION TO ATTACH BATTERY PACK (Fig.1) FIG. 1 1. L ock the trigger switch in the “off” position. 2. Align the raised portion on the battery pack with the grooves on the saw, and then attach the battery pack to the tool as shown. NOTICE: Make sure that the latch on the battery pack snaps into place and the battery pack is secured to the tool before beginning operation. TRIGGER SWITCH (Fig. 2) FIG. 2 To turn the tool ON, push the lock-off button and depress the trigger switch.
OPERATION WARNING: Be sure that the blade is properly seated on the pulleys before starting the cut. FIG. 4 3 4 1 1. Blade 2. Bearing 3. Upper holder 4. Lower holder 2 To remove the blade, follow the installation procedure in reverse. WARNING: The blade may kick up as you released the blade tightening lever. Do not face to the blade or position the blade toward your body. Keep distance with it. TYPICAL APPLICATION (Fig.6) FIG. 5 3 FIG. 6 1 2 1. Upper holder 2. Lower holder 3. Wheel 1.
MAINTENANCE WARNING: Always wear safety goggles or safety glasses with side shields during power tool operations, or when blowing dust. If operation is dusty, also wear a dust mask. It has been found that electric tools are subject to accelerated wear and possible premature failure when they are used to work on fiber glass boats and sports cars, wallboard, spackling compounds or plaster.
TROUBLESHOOTING PROBLEM CAUSE SOLUTION The saw does not work Battery is depleted Charge thee battery Page 12
notes Page 13
20 VOLT PORTABLE BAND SAW WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2013 Menard, Inc.