2 Volt Lithium-Ion Right Angle Drill 241-0315 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374. (M-F 8am – 6pm EST.
table of contents Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
safety symbols Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
safety INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
safety INSTRUCTIONS GENERAL SAFETY RULES WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2.
safety INSTRUCTIONS 6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. 6. Keep cutting tools sharp and clean.
safety INSTRUCTIONS SPECIFIC SAFETY INSTRUCTIONS FOR RIGHT ANGLE DRILL 1. Use the tool only with the battery and charger listed below: Battery pack Charger 9. Release the trigger immediately when the screws are tightened to avoid breaking the screw. 10. For best results, your battery tool should be charged in a location where the temperature is more that 50°F (10°C) but less that 104°F (40°C). Do not store outside or in vehicles. 252-8016 252-8020 252-8017 2.
overview Hexagonal chuck Locking sleeve LED worklight Direction-of-rotation selector Variable-speed trigger switch Specifications Motor 12 Volt DC Switch VSR (Variable Speed Reversible) No-Load speed Chuck Page 7 0-700 RPM 1/4” (6.35 mm) Maximum torque 120 in-lbs. Drill weight (Without battery) 1 lb. 6 oz.
Specifications 1/4 in. QUICK CHUCK LED WORKLIGHT Quick and easy bit changes without the need for tools. The LED worklight, located on the front of the right angle drill, illuminates when the trigger switch is depressed. This feature provides extra light for increased visibility. VARIABLE SPEED The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
OPERATION TO ATTACH BATTERY PACK (Fig. 1) TO DETACH BATTERY PACK (FIG. 1) CAUTION: When placing the battery pack in the tool, be sure that the raised rib on battery pack aligns with the groove on the drill and the latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components. 1. Depress the battery release button located on the both sides of the battery pack to release battery pack. 2. Pull battery pack out and remove it from the tool.
OPERATION DIRECTION-OF-ROTATION SELECTOR (FORWARD/ CENTER LOCK/REVERSE) (Fig. 3) FIG. 3 ELECTRIC BRAKE To stop the right angle drill, release the trigger switch and allow the chuck to come to a complete stop. The electric brake quickly stops the chuck from rotating. This feature engages automatically when you release the trigger switch. LED WORKLIGHT (Fig. 4) FIG.
OPERATION INSTALLING BITS (Fig. 5) FIG. 5 DRILLING (Fig. 6) FIG. 6 Chuck Locking sleeve 1. Lock the trigger switch by placing the direction of rotation selector in the OFF (center) position. 2. With one hand, pull the sleeve toward the front of the tool, and hold it in place. 3. With the other hand, insert the 1/4-in. bit into the hexagonal chuck. 4. Release the sleeve and check that it returns to its original position and the bit is securely held in place. 5.
OPERATION Drilling metal There are two rules for drilling hard materials. First, the harder the material, the greater the pressure you need to apply to the tool. Second, the harder the material, the slower the speed you need to operate the tool. Here are a few tips for drilling in metal: 2. If the hole to be drilled is fairly large, drill a smaller hole first, then enlarge to the required size, it’s often faster in the long run. 3.
notes Page 13
12 Volt Lithium-Ion Right Angle Drill WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2013 Menard, Inc.