Instructions / Assembly

Master Garden Products.
1-800-574-7248
Willow, Heather, Slat and Fern Rolled Fencing Care and Setup
Note: This is only our suggested method of setting up our Willow rolled fences. You may do it in
any way you want. This is just a suggestion to help.
Our Willow rolled fences come in bundles for ease of transport. Once unrolled, these fences can
be installed along a pre-existing fence or as a standalone fence with proper post and frame
supports. Bamboo slat fencing can be treated with polyurethane every 3-4 years.
It is necessary to have a rigid structure to support most rolled fences like the bamboo rolled
fence, reed fence, willow rolled fence or the heather fence when used as a fence. If it is being
applied to an existing wooden fence which provides a flat vertical plane surface, the rolled fence
can be held to the existing fence with galvanized wire or staples applied with a staple gun.
Galvanized or stainless staples are recommended. If the existing fence is a chain link fence
and the fabric of the fence is on the side to receive the reed, the material can be wired through
the vertical fence materials to the chain link with galvanized wire. The wiring should be done
about every 4 or 5 inches at top bottom and middle. We recommend and prefer using
galvanized wire to tie the rolled fences whenever possible. IMPORTANT NOTE: When tying or
stapling, all the rolled fences with wire line should be tied or stapled on the existing wire that are
weaving them. This will blend the galvanized wire and staples to the existing wire and firmly
hold the fences' structure.
Thank you for your business!
Any Questions? Call us at: 1-800-574-7248