Digital Video Switcher SE-2000 INSTRUCTION MANUAL Rev 221009 www.datavideo-tek.
Contents Warnings and Precautions .................................................................................................. 2 Packing List ......................................................................................................................... 3 Introduction .......................................................................................................................... 3 Product Overview .....................................................................................
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6.
Packing List Items Description Q’ty 1 SE-2000 1 2 DVI-D Cable Length 1.8M 1 3 AC Power Cord 1 4 AC/DC Switching Adaptor 12V DC 5A 1 5 SE-2000 Instruction Manual 1 Introduction Thank you for purchasing the Datavideo SE-2000 Digital Video Switcher. We hope you will be pleased with your purchase, and with what you can achieve with this switcher.
Features FULL HD: Input: Or 3x HD-SDI, with 2x DVI-D inputs (Optional - See page 18 for example set up) PGM: Full HD output, HD-SDI and HD-YUV format PVW: DVI-D 4x HD-SDI with 1x DVI-D input (Optional - See page 18 for example set up) Output: Multi Image Preview output with digital clock, selected transition and user profile display. DVI-D for Power point presentation, simple titling and overlays, also supports full HD input. LOGO and CLOCK insertion.
Connections & Controls Keyboard 3 4 5 6 2 7 8 1 12 11 10 9 1. Audio mixer 7. Transition Speed 2. Audio input selectors / Level Controls 8. Transition Effects 3. Audio meters 9. CUT & TAKE 4. Menu and Controls 10. T-Bar 5. Logo & Clock Selection 6. Video Effect: PIP / KEY 12. Headphone Monitoring & Volume Control 11.
Audio mixer These CH1~CH4 Audio Level Faders are for controlling the CH1~CH4 audio mix. These faders correspond to the Audio Source selector buttons and control the relative volume of each input in the master output as well as the master output level. They are called faders because they are used to decrease (rather than increase) the signal levels to create a balanced and pleasing mix.
System Configuration Menu Press the Menu button in the SE-2000 function section to enter the System Configuration Menu. Press the up, down, left, and right arrow buttons to navigate the menu options and to change values. Use the ENT button to save and confirm any setting that has been amended. Logo Setting Press the Logo1, Logo2 or Clock buttons to display the selected function on the PVW and PGM screens.
T-Bar The T-Bar is used to carry out a manual transition such as a wipe, fade, mix or key. When it has traveled as far as it can go the transition is complete. Calibrating the T-bar : 1. Turn off the SE-2000 power, and push the T-Bar up as far as it can go to its Top or AIR position. 2. Press and hold in the SET and SUB SOURCE 1 buttons at the same time. 3. Have a colleague turn on the SE-2000 power. When the SET button and SUB SOURCE 1 buttons are illuminated yellow release both buttons. 4.
Rear Panel 12 1 2 3 4 5 11 6 7 1. HD- SDI INPUTS 1~3 7. HD- YUV PGM OUT 2. HD- SDI IN or DVI-D IN 8. DVI-D MULTI PREVIEW OUT 3. DVI-D IN 9. DC IN 12V 5A 4. TALLY Output 10. POWER ON / OFF 5. RS-232 6. HD- SDI PGM OUT 11. AUDIO OUT 12. AUDIO IN 10 8 9 Rear Panel Connections 1. HD- SDI IN Inputs 1 to 3 are HD-SDI inputs only on BNC connections. 2. HD- SDI IN / DVI-D IN Input 4 has a choice of two connections HD-SDI (via BNC) or DVI-D.
6. HD- SDI OUT 4:2:2 SDI Video data supports SMPTE 292M standard at 1.5G Mbps. SDI transfers professional level video signals and it’s can connect to long distance transmission systems. 7. HD- YUV OUT HD- YUV component analogue output connectors. 8. MULTI PREVIEW OUT DVI-D digital signal preview output connector (PVW). 9. DC IN DC in socket connect the supplied 12V 5A PSU to this socket. The connection can be secured by screwing the outer fastening ring of the DC In plug to the socket. 10.
Multi Preview Output The Multi Preview output on the rear of the SE-2000 should be connected to a compatible 19” to 24” LCD monitor via a DVI-D cable connection. This Multi Preview display output can be run at 1080i or 720p [60Hz]. The Multi Preview display confirms at a glance the values for Clock, Transition, User Profile, Input 4 and HD Mode as well as indicating which sources are selected for PiP, PREVIEW and PROGRAM.
Main Source and Sub Source Rails The Main Source Rail shows the active channel, this is the Live output. The active channel will also appear as the Program Output (PGM). You can immediately switch or CUT from one input channel to another directly on the Main Source Rail, you will see the PROGRAM Output switch as you press different keys along this rail. As each key is selected or pressed it will turn Red. The Sub Source Rail shows the Cued channel, the selected channel will appear in the Preview window.
System Configuration Menu Menu and Navigation Press the MENU button in the Function section of the SE-2000’s keyboard to enter the System Configuration Menu. The menu will be displayed on the SE-2000’s Multi Preview output as below. Press the UP, DOWN, LEFT and RIGHT arrow buttons to highlight or select a menu option. Then use the UP and DOWN arrow buttons to change the value of the selected item or option. Press the ENT button to Enter and save your chosen value for the selected menu item.
PIP SETTING - Press the MENU button and highlight the PIP SETTING. - Press the arrow buttons to select an item and press the ENT to confirm the setting.
MODE SETTING - Press the MENU button and highlight the MODE SETTING. - Press the arrow buttons to select an item and press the ENT to confirm the setting. - This Mode setting is used to adjust the HD input mode. - HD Mode values can be 1080/50i - 1080/60i - 1080/59.94i - 720/50p - 720/60p or 720/59.94p - MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile. - Please ensure your HD input source(s) match the HD mode of the SE-2000.
BACKGROUND - Press the MENU button and highlight the BACKGROUND option. - Press the arrow buttons to select an item and press the ENT to confirm the setting. - This option sets the background colour of the Multi Preview screen – options are Black, Grey or Blue. BLACK & BARS POS.RIGHT - Press the MENU button and highlight the BLACK & BARS POS.RIGHT option. - Press the arrow buttons to select an item and press the ENT to confirm the setting.
Audio Inputs and Levels Analog audio comes into the SE-2000 through the XLR connectors on the rear panel (see above diagram). The SE-2000 supports four XLR Balanced Audio Input channels. There are two kinds of switches next to each XLR input under AUDIO IN: The LINE/MIC switch is used to set the audio as LINE in or MIC in. When LINE in is selected please also set the 48V ON/OFF switch to OFF in order to prevent burn-out damage to the audio circuit/Mic*. The 48V ON/OFF switch is for Phantom power.
Example SE-2000 Set Ups 18
SE-2000 Configuration Utility The Configuration Utility software allows a PC (running Windows XP Professional) to make changes to the mixer* Logos tab via the RS-232 port on the rear of the SE-2000 from the PC COM1 Serial port. This software Utility is free and can be downloaded from the following web page http://www.datavideo.info/en/Mixer%20-%20Switchers/SE-2000 Once downloaded, run the install wizard and follow the on-screen prompts. The installation will leave an Icon on the PC desktop as above.
Setting up a Luma Key overlay with PowerPoint The SE-2000 has 5 inputs. Input 5 is DVI only and this can be used to connect a DVI-D cable from a computer’s monitor/graphics card. The PC graphics card will need 2 connections 1 for the PC monitor and a spare DVI-D connection to go to input 5 on the SE-2000. The PC will need to have Microsoft Office installed in order for PowerPoint to be used.
HD-SDI Cabling Advice Start with good cabling. BNC coax cables and connectors are not all made to the same standard. From the thickness and grade of the centre conductor to the type of dielectric, all these factors contribute to impedance, attenuation and Return Loss (RL). Serial Digital Video coax like Belden 1694A or Canare L5CFB are good examples of broadcast quality SDI cable. A 75 Ohm (Ω) impedance must be maintained throughout the SE-2000 SDI signal or cable path, including BNC connectors etc.
Optional Datavideo Accessory Items for the SE-2000 Datavideo have a number of accessory products which will allow you to get the most from your new SE-2000. Please speak to your local dealer or visit the website for your local Datavideo office for more details on these and other products. 17” High quality LCD monitor ideal for multiple preview output from SE-900. Model No.
Specifications Inputs Outputs Video Input • 4x BNC connector for HD -SDI input • 2x DVI connector for DVI-D input (1x DVI-D input is collective with SDI#4 channel) • 2x HD-SDI output, 1x HD-YUV output, and 1x DVI-D output • HD (1080/50i - 1080/60i - 1080/59.94i - 720/50p - 720/60p - 720/59.
Service and Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below. Datavideo Global Website: www.datavideo-tek.com Datavideo Corporation Tel: +1 562 696 2324 Fax: +1 562-698-6930 E-Mail: contactus@datavideo.
