Specifications

SOUND REINFORCEMENT WlTH A GRAPHIC EQUAL-
IZER
[OR EFFECTS DEVICE)
SETUPS
The AUDIOMASTER system is extremely versatile; con-
sequently it can be used in a wide variety of applications.
The setups shown in this section briefly illustrate the dif-
ferent combinations that are possible.
NOTE: Use proper cables when interconnecting equip-
ment. Low-level audio connections require shielded (coax-
ial type) cable. Speaker leads need not be shielded, but
should be at least 18-gauge
(AWG).
BASIC SOUND REINFORCEMENT
Connect as many microphones as required, and set the
operating controls as desired. Attach one Model 3200
Loudspeaker to each speaker output.
-ww m.,. """7- ws.
2*YiP' UmmmmlEn ,, m.&e y. zF"
YODEL 1200 POWllMllEI
(SECOND
SPEAKER
OPTIONAL)
SOUND REINFORCEMENT AND TAPE RECORDING
Attach 1 Model 3200 Loudspeaker to each speaker out-
put; connect the TAPE OUTPUT to the tape recorder Aux
Input.
NOTE: The TAPE OUTPUT level is independent of the
MASTER VOLUME control. Use the tape deck input level
controls to set the record level.
YODEL ,100 .OWEIYI'I"
connect a graphic equalizer or effects device to the EXTER-
NAL DEVICE LOOP: PROGRAM MIX OUTPUT to graphic
equalizer input, graphic equalizer output to POWER AMPLI-
FIER INPUT. Connect the speakers as for Basic Sound
Reinforcement.
, SBAPHIC EOUALtZER ,
-
SOUND REINFORCEMENT WlTH A SEPARATE MAlN
AMP AND SPEAKERS, USING THE INTERNAL AMP FOR
MONITOR SPEAKERS
Connect a shielded cable from the MONITOR OUTPUT to
the POWER AMPLIFIER INPUT. Connect monitor speak-
ers (with minimum 4-ohm total load) to the SPEAKER
OUTPUTS. Connect a shielded cable from the PROGRAM
MIX OUTPUT to an external amplifier (or crossover/
amplifiers); and connect main
speaker(s) to the external
amplifier(s). The 1200 MONITOR MASTER controls the
output level from the 1200 amplifier to the monitor speak-
ers; the 1200 MASTER VOLUME controls the PROGRAM
MIX OUTPUT level to the external main amplifier and
speakers.
AMPLIFIER
PI
MAlN SPEAKERS
[ I
A1 MONITOR SPEAKERS