Manual

24
- If you see in the table some empty cells or marked yellow/red, it is an indication
that distances between Some beacons are measured inconsistently or not
measured at all. Try to re-position them because usually there is an obstruction
of some sort in the between the beacons. It also may be different height of
beacons’ positon. Reset all these beacons.
Use View => Table of distances to monitor the measured distances between
beacons
- Freeze the map by clicking the button. Stationary beacons will stop measuring
relative distances and will be ready to measure distance from the mobile
beacon(s)
- Turn on and wake up the mobile beacon following the same steps as with the
stationary beacon: https://youtu.be/A4aRsjH2-_E