Operation Manual

32
TBD
Power supply voltage of the device 5V+-0.2V is OK
N/A
Time from the latest reset
Measured temperature of the processor’s crystal
Strength of the radio signal from modem to beacons and
vice versa. Maintain in the range of -25dBm to -80..-
90dBm. Higher value - may overload. Lower lost packets
Chosen working band
Exact working frequency
Logical address of the device. Keep 2..255 for beacons.
Address
Pre-selected channel one of the radio channels for
communication between modem and beacons
If enabled, beacons will be seen as green dots on the map.
If disabled, they won’t be seen at all
Enable or disable visibility of Service Areas (Zones)
Make Service Zones active or not active