Owner manual

ManualsBrandsMartin Universal Design ManualsFurnitureU-DS1776R - Liberty Drawing Table

Assembly Instructions

U-DS1776R

IMPORTANT

If you have difﬁculty assembling your U-DS1776R Liberty Table

or need customer service assistance. Please call:

Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700.

If you need additional parts, it is not necessary to contact your dealer,

our Customer Service Rep. will forward them to you immediately

Martin Universal Design, Inc. • Detroit, MI 48208 USA

Tel: 131-895-0700 • E-mail: custservMUD@aol.com

www.MartinUniversalDesign.com

Since 1853

August 08, RPI

Summary of content (8 pages)

PAGE 1
Assembly Instructions U-DS1776R IMPORTANT If you have difﬁculty assembling your U-DS1776R Liberty Table or need customer service assistance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700. If you need additional parts, it is not necessary to contact your dealer, our Customer Service Rep. will forward them to you immediately. Since 1853 Martin Universal Design, Inc. • Detroit, MI 48208 USA Tel: 131-895-0700 • E-mail: custservMUD@aol.com www.MartinUniversalDesign.
PAGE 2
Since 1853 Hardware Parts List A 02 ea. M5 x 12 B 12 ea. M4 x 14 C 02 ea. M6 x 12 D 02 ea. M6 x 19 E 06 ea. M6 x 35 F 08 ea. M6 x 40 G 02 ea. 20 x 2.0 H 06 ea. M6 I 02 ea. M8 J 02 ea. M16 x 53 K 01 ea. 60 x 25 x 20 L 08 ea. M 01 ea. N 02 ea. O 01 ea. P 01 ea. M4 Q 01 ea. M10 R 01 ea. M14 S 01 ea. T 01 ea.
PAGE 3
Parts List Since 1853 1 Base Foot 2 ea. 2 Side Support 1 ea. 3 Side Support 1 ea. 4 Top Support 1 ea. 5 Mod. Panel 1 ea. 6 Shelf 1 ea. 7 Top 1 ea. 8 Side Shelf 1 ea. 9 Pencil Trough 1 ea.
PAGE 4
Assembly Since 1853 NOTE: We reccommend the The Assembly of this table to be performed with two adult people. FIG 1 Part 3 Part 2 STEP 1 Begin assembly of Liberty table by taking each base (part 1) and slide parts 2 & 3 over the upright column of part 1. Secure with one knob by tightening clockwise to each assembled base leg (part J). See Fig 1 Zoom of Knob attachment J STEP 2 FIG 2 Continue by attaching the top support (part 4) to the [2] base leg assemblies.
PAGE 5
Assembly Since 1853 STEP 3 This step involves attaching the Modesty Panel (part 5) to the table base. To do so you must use 2 ea. Cam Locks (part L). Insert the cam locks in the rear side of the Modesty Panel by placing them into the pre-drilled holes that can be found near each of the 4 corners. Make sure the Phillips screwdriver head is facing out of the modestly panel holes. Continue by lining up the holes in the ends of the Modesty Panel with the holes in the side of the base legs.
PAGE 6
Assembly Since 1853 STEP 5 Attachment of Table Top Tilt Mechanism Position of Tilt Mechanism (part 4) & Zoom of Tilt Mechanism attachment O NOTE: Make sure Tilt Mechanism is on correct position as show in FIG 5. I Begin by taking the Table Top Tilt Mechanism (Part O) and attaching it to the welded block with hole found at the center of the Top Support.
PAGE 7
Assembly Since 1853 STEP 8 Attaching Base to Top FIG 8 To attach the Base to the top, you will need to position the end of the top rail of each base leg into the Base Bracket (part N) as indicated in the Zoom portion of FIG 8. After positioning it properly secure it in place using 1 ea. Bolt (part E) and 1 ea. Nut (part H). Tighten down to secure. Repeat with second bracket on other end of table.
PAGE 8
Assembly Since 1853 STEP 9 Attaching Accessory Hook FIG 9 A To attach the Accessory Hook, position the hook plate (part K) over the 2 holes found in the side of the table base. Secure using 2 ea. bolts (part A). Tighten. See FIG 9 for detailed image. This Accessory Hook can be used for keys, hang bag, sealable pot holder and brush washer. K STEP 10 Placement of Folding Side Utility Shelf FIG 10 The Folding Side Utility Shelf can be placed on either the Left or Right Side of the table.