Installation Guide

ManualsBrandsMartha Stewart Living ManualsGarden Center3600 sq. ft. Indestructible Oscillating Sprinkler with Adjustable Spray Patterns

Model MTS-IDSPR

Form No. SJ-MTS-IDSPR-880E-M

OPERATOR’S MANUAL

, LLC

SAVE THESE INSTRUCTIONS

HEAVY-DUTY OSCILLATING SPRINKLER

3600 SQ FT | METAL BASE

1. Base

2. Spray nozzles (16)

3. Oscillator tube

4. Hose-end

5. Sliding tabs

6. Inlet lter

7. Cleaning pin

Technical Data

Plastic nozzle heads ..................................... 16

Adjustable range control .............................. Yes

Coverage Max: ............................................. 3600 sq ft (335 m

)

Spray distance max ..................................... 70 ft (21 m)

Motor ............................................................ Turbo drive

Weight .......................................................... 1.41 lbs (0.64 kg)

Know Your Sprinkler

Operation

Use sliding tabs to select desired position and take advantage of the sprinkler’s adjustable range control (Fig.1).

Refer to (Fig. 2) to see the dierent sprinkler options.

sliding tabs

Fig. 1

Fig. 2

Watering Tips

Water only when necessary, preferably in the morning to minimize water loss through evaporation. To promote deep root growth,

water deeply but as infrequently as possible. Watch water application to avoid water run-o.

Summary of content (4 pages)

PAGE 1
HEAVY-DUTY OSCILLATING SPRINKLER 3600 SQ FT | METAL BASE OPERATOR’S MANUAL Model MTS-IDSPR Form No. SJ-MTS-IDSPR-880E-M Know Your Sprinkler 1. Base 3 5 2. Spray nozzles (16) 7 3. Oscillator tube 4. Hose-end 5. Sliding tabs 6. Inlet filter 7. Cleaning pin 6 2 4 1 Technical Data Plastic nozzle heads...................................... 16 Spray distance max ...................................... 70 ft (21 m) Adjustable range control............................... Yes Motor....................
PAGE 2
Maintenance + Care 4. Use the provided cleaning pin to clear any clogs from the spray nozzles. Fit cleaning pin firmly back in place before using the sprinkler (Fig. 6). Follow the steps below if the sprinkler stops working or exhibits poor water quality due to debris or dirt build-up. 1. Remove the inlet filter from the hose-end of the oscillator and run under water (Fig. 3). Fig. 3 hose-end Fig. 6 cleaning pin inlet filter inlet filter Storage Drain the sprinkler after use.
PAGE 3
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 4
snowjoe.