Use and Care Manual

ManualsBrandsMartha Stewart Living ManualsDrills4-Volt Cordless 1/4 in. Drill Driver with Quick-Bit Swap System

Model MTS-04DD Form No. SJ-MTS-04DD-880E-M

OPERATOR’S MANUAL

CORDLESS DRIVER

4-VOLT | RECHARGEABLE

, LLC

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! When using the driver basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

3. Do not operate power tools in explosive atmospheres

– Such as in the presence of ammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the driver when you are tired, or

under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the driver

with your nger on the trigger. Make sure the switch is o

before connecting the driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dusk mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

6. Remove adjusting keys, or wrenches before turning

driver on – A wrench or a key that is left attached to a

rotating part of the tool may result in personal injury.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Donotusedriverifswitchdoesnotturnonoro–

The driver that cannot be controlled with the switch is

dangerous and must be repaired.

3. Disconnect the plug from the power source and/

or battery pack from the driver before making any

adjustments, changing accessories, or storing the

driver – Such preventive safety measures reduce risk of

starting the power tool accidentally.

4. Store idle driver out of reach of children or other

untrained persons – Drivers are dangerous in the hands

of untrained users.

5. Maintain cordless driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may aect the driver's operation. If

damaged, have the driver serviced before using. Many

accidents are caused by poorly maintained tools.

6. Use the driver, accessories and driver bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed – Use of the driver for operations dierent

from those intended could result in a hazardous situation.

7. Hold driver by insulated gripping surfaces when

perfoming an operation where the driver may contact

hidden wiring or its own cord – Contact with a "live wire"

will make exposed metal parts of the tool "live" and shock

the operator.

Summary of content (12 pages)

PAGE 1
CORDLESS DRIVER 4-VOLT | RECHARGEABLE OPERATOR’S MANUAL Model MTS-04DD Form No. SJ-MTS-04DD-880E-M IMPORTANT! 6. Remove adjusting keys, or wrenches before turning driver on – A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. Safety Instructions 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. – Use of dust collection can reduce dust-related hazards.
PAGE 2
Battery Tool Use and Care 9. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the driver's operation. Do not use the tool if you find damaged or missing parts. 1. Recharge only with the charger specified by the manufacturer – A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 10. Do not use the driver if forward + reverse selector switch does not work. 2.
PAGE 3
8. Do not disassemble the charger. If the charger requires service or repair, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). Incorrect reassembly poses a risk of electric shock, electrocution or fire. 9. To reduce the risk of electric shock, unplug the charger from the outlet before cleaning the unit. 10. Never attempt to connect two (2) chargers together. 11.
PAGE 4
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning, or a danger.
PAGE 5
Know Your Cordless Driver Read the owner’s manual and safety instructions carefully before operating the cordless driver. Compare the illustration below to the cordless driver in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Battery charger 2. Charger plug 3. Loading bolts (x2) 4. Forward + reverse selector switch 5. Charge socket 6. Charging indicator light 9 3 7. Hand grip 8. Trigger switch 9. Bit port 10.
PAGE 6
Unpacking Battery Charging The length of service between each charging varies depending on the type of work you are doing. The battery in this driver has been designed to provide maximum trouble-free life. However, like all batteries, it will eventually wear out. To obtain the longest possible battery life, we suggest the following: Carton Contents • Cordless driver • Bit cylinder (pre-loaded) • 6 bits (pre-loaded) • Store and charge your driver in a cool area.
PAGE 7
Assembly 3. Position the bit cylinder with bits facing forward and press it into the bit chamber opening from the right side (Fig. 4). • Before inserting the bit cylinder, make sure the forward + reverse selector switch is in the center “LOCK” position to prevent accidental starts that may result in injury. Fig. 4 • When removing the bit cylinder from the tool, avoid contact with skin and use proper protection gloves when grasping the bit. Bits may be hot after prolonged use.
PAGE 8
Operation Selecting the Direction of Rotation mWARNING! Be sure the trigger switch is released when Loading + Unloading Driver Bits changing the position of the forward + reverse selector switch. Always store the tool in the locked/off position. 1. Position the forward + reverse selector switch to the center “LOCK” position (Fig. 2). NOTE: Always check the direction of the cordless driver rotation before use. 2.
PAGE 9
Cleaning + Maintenance Starting + Stopping mWARNING! Be sure the trigger switch is released when mWARNING! To avoid accidents, always disconnect the changing the position of the forward + reverse selector switch. Always store the tool in the locked/off position. tool and/or charger from the power supply before cleaning. The tool may be cleaned most effectively with compressed air. Always wear safety goggles when cleaning tools with compressed air. 1.
PAGE 10
Lithium-Ion) batteries. 6. Do not dispose of batteries in fire. The cell of the battery may explode. 7. Batteries should be recycled or disposed of as per state and local guidelines. Service + Support • Driver service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. • When servicing an driver, use only identical replacement parts. Follow instructions in the cleaning and maintenance section of this manual.
PAGE 11
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 12
mWARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov. mWARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.