User Manual

V-MD702 Operating Instructions

Use this row to select what function should be controlled by the CONTRAST buttons on the physical unit or on

the Network Control Page. This can be changed for each individual panel, or on the global level under the

GLOBAL column.

■

Load Setup

Use this row to load any of the Setup configuration files available on the monitor. This can be selected for each

individual panel, or on the global level under the GLOBAL column. When selecting from the GLOBAL column,

each individual panel will load its own individual settings. For example, if you select User 3 from the GLOBAL

column, each panel will load a separate User 3 setting, not a single file.

■

Save Setup

Use this row to Save the current configuration on each individual panel or on the global level. When selecting

from the GLOBAL column, each individual panel will save its own individual settings. For example, if you select

User 3 from the GLOBAL column, each panel will save a separate User 3 setting, not a single file.

■

Setup Name

Use this dialogue box to rename the User configuration files available. Choose up to 16 characters to

customize the names of the User configuration files. You can also assign each User configuration file a

name globally. The name you select in this dialogue box will be stored and available from the Load and

Save setup options previously mentioned.

■

Power-On Setup

Use this row to select the settings to be loaded when power is applied to the V-MD702 monitor. This can be

selected for each individual panel or globally in the GLOBAL column.

Function Presets

■

Function on F1 / F2

Use these rows to select the functions set to be controlled by the F1 and F2 buttons on the physical unit or on

the Network Control page. These functions can be set individually per panel or on the global scale using the

GLOBAL column.

IMD / Tally Config