Operation Manual
ENGLISH
15
CONNECTING AUDIO COMPONENTS
The output audio signal from the TAPE OUT jack
and the CD-R/MD OUT jack is the same signal
which is currently selected.
Caution:
• Do not connect this unit and other components to
mains power until all connections between
components have been completed.
Notes:
• Insert all plugs and connectors securely.
Incomplete connections may make noise.
• Be sure to connect the left and right channels
properly.
Red connectors are for the R (right) channel, and
white connectors are for the L (left) channel.
• Be sure to connect input and output properly.
• Refer to the instructions for each component that
is connected to this unit.
• Do not bind audio/video connection cables with
power cords and speaker cables this will result in
generating a hum or other noise.
CONNECTING DIGITAL AUDIO COMPONENTS
• There are 4 digital inputs, 2 coaxial jacks and 2
optical jacks, on the rear panel. You can use
these jacks to input PCM, Dolby Digital and DTS
bitstream signals from a CD, DVD, or other
digital source components.
• There is one digital output coaxial jack and one
optical output jack on the rear panel. These
jacks can be connected to a CD recorder-, or a
MD deck inputs, respectively.
• Refer to the instructions for each component. To
setup the digital audio format of DVD player, or
other digital source’s connected to digital input
jacks.
• Use fiber optical cables (optical) for DIG-1,2
input jacks. Use 75 ohms coaxial cables (for
digital audio or video) for DIG-3, 4 input jacks.
• You can designate the input for each digital
input/output jacks according to your component.
See page 20.
CD RECORDER / MD DECK
CD PLAYER
TAPE DECK
ANALOG AUDIO
DIGITAL AUDIO
(COAXIAL)
DIGITAL AUDIO
(OPTICAL)
Notes:
• There is no Dolby Digital RF input jack. Please
use an external RF demodulator Dolby Digital
decoder when connecting the Dolby Digital RF
output jack of the video disc player to the digital
input jack.
• The digital signal jacks on this unit conform to the
EIA standard. If you use a cable that does not
conform to this standard, this unit may not
function properly.
• Each type of audio jack works independently.
Signals input through the digital and analog jacks
are output through the corresponding digital and
analog jacks, respectively.
SPEAKER SYSTEMS : MINIMUM 6 OHMS
FRONT CENTER SURROUND SURROUND BACK
M. SPEAKER B
MULTIMULTI
OUTOUT
TVTV DVDDVD
CC
ININ OUTOUT
S-VIDEOS-VIDEO
DVDDVD
DSS/VCR2DSS/VCR2
CC
RS-232CRS-232C
RCRC
MULTIMULTI
ININ OUTOUT
DSS/VCR2DSS/VCR2
ININ OUTOUT OUTOUT
VCR1VCR1
VCR1VCR1
LL
SBRSBR
SBLSBL
OUTOUT
PREPRE
SLSLLL
SRSRRR
DSS/VCR2DSS/VCR2DVDDVDTVTV
RR
ININ
RR SWSW
RC-5RC-5
ININ
SRSR
AUDIOAUDIO
7.1CH7.1CH
ININ
OUTOUT ININ
LL SLSL
SBRSBR
SBLSBLCDCD
ININ OUTOUT
SWSW
OUTOUT
CDR/MDCDR/MDTAPETAPE
OUTOUTININ
ININ OUTOUT
VIDEOVIDEO
MONITORMONITOR
VCR1VCR1
TVTV OUTOUT
((
AUX2AUX2
))
MONITORMONITOR
DIGITAL INDIGITAL IN DIGITAL OUTDIGITAL OUT
33
11 OPT.OPT.22
44
COAX.COAX.
RL LRRL
SWITCHED UNSWITCHED
1A 120W MAX 1A 120W MAX
FM FM
((
7575
ΩΩ
))
ANTENNAANTENNA
GNDGND AMAM
COMPONENT VIDEOCOMPONENT VIDEO
CC
BB
//
PP
BB
CC
RR
//
PP
RR
CC
RR
//
PP
RR
CC
RR
//
PP
RR
CC
BB
//
PP
BB
CC
BB
//
PP
BB
INPUT-1INPUT-1
YY YY
MONITOR OUTMONITOR OUTINPUT-2INPUT-2
YY
OUTOUT
AC OUTLETS
120V 60Hz
AC IN
IR EMITTER OUT
R
1
L
234
MULTI FIXED OUT
ININ
FLASHERFLASHER
AUDIOAUDIO
ININ
CDCD
ININ OUTOUT OUTOUT
CDR/MDCDR/MDTAPETAPE
DIGITAL INDIGITAL IN
11 OPT.OPT.
OUT IN
L
R
L
R
OUT
L
R
L R
L R
L R
RL RL RL
OUT IN
L
R
L
R
DIGITAL
INPUT
DIGITAL
OUTPUT
DIGITAL
OUTPUT
R L
R L R L
RL
L R
ZR6001U DFU_01_ENG 1_2 06.3.6, 4:27 PMPage 15 Adobe PageMaker 6.5J/PPC