OPERATOR’S / PARTS MANUAL CLASSIC ELECTRIC TILLER P/N 7250
Welcome to the World of Mantis Gardening 1. Here’s your new Mantis Electric Tiller . . . the lightweight wonder that’s “Changing the Way Americans Garden®.” 2. Unlike big tillers, your Mantis Electric Tiller weighs only 21 pounds. So it lifts easily, handles smoothly, tills and weeds precisely. And, unlike other small tillers, it features serpentine tines that churn soil to ten inches deep. It creates a soft, smooth seed bed, even in problem soil. 3.
IMPORTANT MESSAGE Thank you for purchasing this Schiller Grounds Care, Inc. product. You have purchased a world class product, one of the best designed and built anywhere. This machine comes with Operation and Safety instructions, Parts and Service instructions and Engine instructions. The useful life and good service you receive from this machine depends to a large extent on how well you read and understand these manuals.
Safety Rules & Warnings 1. You will notice Safety Rules and Important Notes throughout this owners’ manual. Make sure you understand and obey these warnings for your own protection. I. SPECIAL SAFETY INFORMATION Attention: This symbol points out our important safety instructions. When you see this symbol, heed it’s warning!! Stay alert!! To reduce the potential for accidents, comply with the safety instructions in this manual.
Safety Rules & Warnings IV. IMPORTANT EXTENSION CORD INFORMATION 1. Make sure the extension cords are in good condition before use. 2. Based on the total length of cord that you are going to use, check the chart to make sure the cord meets the correct minimum cord gauge (AWG) requirements. IMPORTANT NOTE: Using an undersized cord, a larger number cord gauge (AWG) than recommended in the chart, will cause a loss in power and overheating of the Tiller.
Assembly A. PARTS Your Mantis Electric Tiller comes partially assembled. You must install only the handlebars, the handle brace, and the tines. This will take just a few minutes if you follow the directions. First, take all items out of the carton. But do not remove the cardboard from around the tiller’s base. Improper assembly of this tiller can result in serious injury. Make sure to follow all instructions carefully. If you have any questions contact our factory at 1-800-366-6268 or an authorized dealer.
Assembly B. LOWER HANDLE ASSEMBLY To identify part numbers, see page 6 and 15. 1. Use the protective cardboard sleeve to stabilize your tiller. Stand the motor assembly (#62) up. (Picture 1) 2. Lay the handle parts within easy reach. You’ll need one of the handle clamps (#19) and one of the lower handles (#10). Note that the lower handles have a short leg on one end. 3. Fit the handle clamp along the outside of the short leg. Line up the holes on the clamp and the leg. 4.
Assembly C. UPPER HANDLE ASSEMBLY 1. Attach the upper handle assembly (#1) – the handle with the power cord – to the right lower handle (#10) and secure with the handle knob (#12), and cap screw (#16). (Picture 1 and 2) 2. Follow the same steps to install the left upper handle onto the left lower handle. (Picture 3) 3. Use the clip (#18) to secure the power cord in place on the lower handle. (Picture 4) 4. Now install the Handle Brace (#14). Line it up with the holes on the upper handles.
Before You Begin Tilling A. STARTING Starting your Mantis Electric Tiller is easy. 1. Simply loop your extension cord through the built-in extension cord holder. This is provided to secure the extension cord and help prevent it from becoming detached. 2. Connect the extension cord to the power cord on the tiller. (Picture 1) 3. Plug the extension cord into an outlet. 4. Pick a speed. (Picture 2) CAUTION: This Tiller is Strong (Powerful).
Tilling The operator of this tiller is responsible for accidents or hazards occurring to himself, other people or their property. A. NOW YOU’RE READY TO USE YOUR MANTIS ELECTRIC TILLER If you’ve seen other tillers, your Mantis Electric Tiller may surprise you. It tills best when you pull it backward! When you pull your Mantis Electric Tiller backward, you give extra resistance to the tines, so they dig deeper. (Picture 1). What’s more, when you go backward, you erase footprints.
Tilling/Cultivating If your tines get jammed or entangled, turn off the tiller at once. Remove the obstruction only while the tiller is unplugged. Never try to remove an obstruction while the tiller is in the on position or plugged in. Serious injury can result. A. HOW ABOUT A FAMILY-SIZE VEGETABLE GARDEN? Nowadays many gardeners prefer small gardens — especially in the suburbs, where space is at a premium.
Tilling/Cultivating E. YOUR MANTIS ELECTRIC TILLER WILL WEED BETWEEN NARROW ROWS! Your Mantis Electric Tiller is a precision weeder that easily fits in tight places. So don’t be afraid to weed anywhere: between plants and shrubs; in corners; against fences; on raised beds; in wide rows; even in very narrow rows. Your Mantis Electric Tiller weeds six* to nine inches wide. So you can run it in a tightly planted garden without damaging your delicate plants.
Troubleshooting C. THE TINES DON’T SEEM TO DIG LIKE THEY USED TO IMPORTANT NOTE: To keep your Mantis Electric Tiller running as efficiently as possible, always make sure the tines are clear of rocks and debris. If you continue to experience problems, call Mantis toll Free at 1-800-366-6268. If the tines are not performing as they did when you first bought the tiller, inspect them for excessive wear. If they are worn, you can order a new pair.
Parts Explosion P/N 438LA P/N 438RA DIRECTION DIRECTION Raised Hub Raised Hub Teeth point in a Clockwise Direction Teeth point in a Counter Clockwise Direction When you look at a Tine with the raised hub facing you and the teeth are pointing in a CLOCKWISE rotation, you have a LEFT HAND TINE. 14 When you look at Tine with the raised hub facing you and the teeth are pointing in a COUNTER CLOCKWISE rotation, you and a RIGHT HAND TINE.
Parts List Key Qty. Part No. Description Key Qty. Part No. Description 1 1 420200 Handle, Right Side Assy 32 1 420131 Housing Set With Circuit Breaker 2 1 420206 Power Cord 33 1 420128 Circuit Breaker 3 1 420203 Trigger, Trigger lock, Button 34 1 420252 Cable Clamp 4 1 3033 Switch Normally Open 35 2 3041 #8-11 x 3/4 Combo Sl Torx T-20 Pan 36 1 466 Worm Gear Housing Assembled PC Board w/Switch 3.
LIMITED WARRANTY MANTIS extends this limited warranty against defects in material and workmanship for a period of five (5) years under normal usage for residential purposes and two (2) years under normal usage for commercial purposes, from the date of purchase by the original purchaser. MANTIS will repair or replace, at its option, any part or parts of the product found to be defective in material or workmanship during the warranty period.