User manual

• Should liquids or other materials (including fragments of broken parts) get inside the speaker
cabinet, immediately shut power off to the speaker and have it professionally inspected
and/or repaired before further operation.
• Turn off the power and unplug from power source when the system is not in use.
1. Connect the speakers to the Output port of the audio source.
2. Plug the power cord into your power source.
3. Turn all the function knobs to their original or minimum positions; push the power button to
indicate On.
4. Adjust the control knobs for the desired effect (clockwise to increase, counterclockwise to
decrease).
5. Turn all the function knobs to their original or minimum positions; push the power button to
indicate Off when the system is not in use.
SPECIFICATIONS
Impedance (front, center, rear) 4 Ohms
Diameter, driver(s) (front, center, rear) 3 in. (7.6 cm)
Connector(s), (included) 3.5 mm
Dimensions 87 x 92 x 155 mm
RMS output power 3 W x 2
Frequency response 160 Hz – 20 kHz
Signal-to-noise ratio (S/N) ≥ 65 dB
Total harmonic distortion (THD) ≤ 0.3%