INCLUDED IH THE PACKAGE REAR EW Lower Crossbar Side Panel Rear Bar Left Side Panel Left Back Panel Internal Shelf Front of the drawer Rear Panel of the drawer 4 Wood Feet 4 PRAM HAT TAN 2 COMFORT
TOOLS NEEDED I INCLUDED IN THE PACKAGE 24x @spoonerism TD Spoon 50x [@ 12x [@ 22x [© 22x 25x E a6x | 66x @porno ©0990 MANHATTAN COMFORT 3
[sleeve 1 « Apply glue (8B) to the upper end of the feet (17) and fix them to the Crossbars (01) with bot (A), positioning them so that the Inclination of the feet faces the lateral ends of the bar. * Apply the protective felt (C) on Bottom of the feet (17). © With the Feet (17) already fixed to the Crossbars (01), position them on the underside of the Base (02), observing the front edge of the parts (edge with finish).
[sere 4 » Connect the the Side Panels (03) and (07) and the Partition (06) on the Base (02) with dowels (E) and bolts 5.0 x 50mm (F). » Connect the Top Panel (08) on the Side Panels (03) and (07) and the Partition (06) with dowels (E) and Mini fix hardware the end the fixing, apply the adhesive covers (I). * Fix the hinge connectors (N) In the Left Side Panel (07) with bolts 3.5 x 14mm (M). » Apply the supports (0) in the Partition (06) and the Left Side (07), for later installation of the Shelves (11).
[sere s Preparing the drawers: « Fix the handles (P) in Front of the drawer (13) with bolts 3.5x25mm (Q). + Connect parts (13), (14) and (15) with dowels (E) and Infix hardware shown in DETAIL 2. « Apply adhesive covers (I) on the mini fix hardware (H). + Place the Base (16) into the channel In the Front (13), to align the edges with the Side panels (14) and apply bolts 3,5 x 16mm [seep 7 « Install the drawers ready assembled 8s shown in the STEP 6, fitting them 0 that the telescopic slides side smoothly.
[sere gs Preparing the Door (12): + Fix the handle (P) in the Door (12) with bolt (Q). » Fix the hinges (N) on the Door (12) with bolts 3.5 x 14mm (M), as shown In the DETAIL 3. [sere 9 Installing the Door (12); « Insert the hinges from the door (12) onto the connector already fixed on the Side Panel (07). The connector Includes two bolts, shown in DETAIL 4. Use the fixer and adjustment bolts on the insert to tighten, adjust and align the door.
