Installation Guide

Finishing Touches:
Use standard molding profiles factory finished to blend with your hardwood floor.
These moldings will address most trim and transition situations quickly and effectively
and should be ordered with the flooring to avoid needless delays in flooring
completion.
Fill any nail holes or small cracks with the proper filler for factory finished flooring.
Color any nicks and splintered edges with a suitable/like-colored stain marker
Remove all debris and clean the floor thoroughly using a suitable hardwood floor
cleaner. Test any cleaner for finish compatibility before using on installed flooring.
Leave care and maintenance information for the consumer.
If additional work is to be completed after the flooring has been installed, the floors
should be covered completely, wall to wall. DO NOT APPLY ANY TAPE DIRECTLY
TO THE FLOORING SURFACE. DAMAGE CAUSED BY TAPE ADHESION IS NOT
COVERED UNDER TERMS OF THE WARRANTY
Applying additional finish over the factory finish may cause problems and does not
improve durability or seal the joints.
Call Customer Service Toll Free at 844-658-4700 with all Technical Questions
Concerns