User Manual

ManualsBrandsMakita ManualsCordless WrenchesCordless impact wrench

8 ENGLISH

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Selecting correct impact socket

Alwaysusethecorrectsizeimpactsocketforboltsand

nuts.Anincorrectsizeimpactsocketwillresultininac-

curateandinconsistentfasteningtorqueand/ordamage

to the bolt or nut.

Installing or removing socket

►Fig.9: 1. Socket 2. Square drive

Toinstallthesocket,pushitontothesquaredriveofthe

tool until it locks into place.

Toremovethesocket,simplypullitoff.

Installing hook

►Fig.10: 1. Groove 2. Hook 3. Screw

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.Toinstall

the hook, insert it into a groove in the tool housing on

eithersideandthensecureitwithascrew.Toremove,

loosen the screw and then take it out.

OPERATION

CAUTION: Always insert the battery cartridge

all the way until it locks in place.Ifyoucanseethe

red indicator on the upper side of the button, it is not

lockedcompletely.Insertitfullyuntiltheredindicator

cannotbeseen.Ifnot,itmayaccidentallyfalloutof

thetool,causinginjurytoyouorsomeonearound

you.

►Fig.11

Holdthetoolrmlyandplacetheimpactsocketover

theboltornut.Turnthetoolonandfastenfortheproper

fastening time.

Theproperfasteningtorquemaydifferdependingupon

thekindorsizeofthebolt,thematerialoftheworkpiece

tobefastened,etc.Therelationbetweenfastening

torqueandfasteningtimeisshowninthegures.

Proper fastening torque for standard bolt

N•m

(kgf•cm)

(200)

(410)

(610)

(820)

100

(1020)

120

(1220)

140

(1430)

160

(1630)

180

(1840)

M16

M14

M12

M10

M12

M14

M16

1.Fasteningtime(second)2. Fastening torque

Proper fastening torque for high tensile bolt

N•m