Use and Care Manual

6 ENGLISH

► 1. Hook 2. Bolt

Nose adapter

To prevent the surface of workpiece from being

scratched or damaged, use the nose adapter.

To detach the nose adapter from its housing base, pull

the nose adapter in the direction of the arrow.

► 1. Nose adapter

To attach the nose adapter to the contact element,

press it onto the contact element until the recessed

parts in four places inside the nose adapter t in four

protrusions of the contact element.

► 1. Nose adapter 2. Contact element 3. Protrusion

4. Recessed part

Air duster

CAUTION: Do not aim the ejection port of the

air duster to someone. Also, keep your hands and

foot away from the ejection port. If the air duster

button is accidentally pushed, it may cause a per-

sonal injury.

CAUTION: Always check your surroundings

before using the air duster. Blown dust or objects

may hit someone.

CAUTION: Do not connect or disconnect the

air hose while pushing the air duster button.

The air supplied to the tool can also be used as an air

duster. You can clean the work area by pressing the

button on the grip end.

► 1. Button

NOTICE: After using the air duster, the driving force

of the tool will temporarily decline. Wait until the air

pressure recovers in this case.

NOTICE: Perform a test blow if you use the air

duster immediately after the oil was applied. The oil

may be sprayed with the air.

ASSEMBLY

CAUTION: Before carrying out any work on

the tool, always lock the trigger by turning the

trigger lock lever to the lock position , and

disconnect the air hose from the tool.

Loading nailer

CAUTION: Do not use deformed nails or

linked sheet.

1. Disconnect the air hose.

2. Depress the latch lever and open the door and

magazine cap.