Instruction manual

4
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see
that the tool is switched off.
1
007285
To sta rt t he to ol , pr es s th e "O N" side o f th e swit ch
located on the front of the tool. To stop the tool, press
the "OFF" side of the switch.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Replacing grinding wheel
Use the wrench provided to release the grinding wheel
by turning the installation screw counterclockwise.
1
2
3
007270
To i ns tall t he gri nd in g w he el , f ol lo w t he r em ova l
procedure in reverse.
Adjusting wheel guard
The top of the wheel guard should be 1 mm below the
surface of the grinding wheel. Adjust height by turning
the guard clockwise to lower it, or counterclockwise to
raise it.
1
2
3
4
1mm
(3/64")
007271
Wiping off the antirust
Wipe off the antirust on the sharpening platform guide
(rail) and the sharpening holder. Coat the sharpening
platform guide and the sharpening holder with machine
oil or spindle oil.
Removing or installing sharpening platform
guide
To r em ov e t he s ha rp en in g p la tf orm gu id e, l oos en th e
screw and slip the set plate aside.
1
2
007272
Loosen the pole fastening screws counterclockwise and
lift off the sharpening platform guide.
1
2
3
007273
To in st all th e s harp en in g pl atfo rm gu id e, fo ll ow th e
removal procedure in reverse.
1. Sharpening
platform guide
(Rail)
2. Pole
3. Pole fastening
screw
1. Slip aside
2. Set plate
1. Grinding wheel
2. Wheel guard
3. Lower
4. Raise
1. Wrench
2. Grinding wheel
installation
screw
3. Wheel
1. Switch