Instruction manual

Installing or removing depressed center wheel
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing
the wheel.
Mount the inner flange onto the spindle.
Fit the wheel on over the inner flange and
screw the lock nut onto the spindle.
To tighten the lock nut, press the shaft
lock firmly
so that the spindle cannot re-
volve, then use the
lock nut wrench and
securely tighten clockwise.
Lock nut
Depressed
center
whpe
_.
Inner flange
To remove the wheel, follow the installation procedure in reverse.
5