SDS

Surface Safe Mildew & Mold Remover
Product:
Material CAS# % TLV(ppm) Other
If eyes are contacted, flush with water for 15 minutes. If irritation persists seek medical attention.
Eyes:
If skin is contacted, wash affected area with soap and water. If irritation persists, seek medical attention.
Skin:
If discomfort is experienced after prolonged exposure to mists/vapors, remove to fresh air. If breathing is difficult,
give oxygen and seek medical attention.
Inhalation:
If ingested, do NOT induce vomiting. Give moderate amounts of water to wash out mouth area and dilute
remaining residue. Seek medical attention.
Ingestion:
Causes burns.
Contact with Eyes:
Contact with concentrate solution will result in dry skin. Prolonged or repeated contact may cause
burns or injury.
Contact with Skin:
N/A
Skin Absorption:
Can cause gastrointestinal irritation, nausea, vomiting or diarrhea.
Ingestion Symptoms:
Mists/vapors may cause irritation of nasal and respiratory passages.
Inhalation Symptoms:
It is important to determine whether exposure is to concentrated or dilute product. The information in this document is
intended to deal with exposure to concentrated product. Generally, exposure to diluted product will result
in substantially less risk of injury than described herein.
Material Safety Data Sheet
13300 E. Nelson Ave
[phone]
MSDS
1 Chemical Product and Company Identification
HD
Mildew Remove
r
Classification:
2 Composition/Information on Hazardous Ingredients
OSHA(PEL)
3 Hazards Identification
Irritant. Causes skin and eye irritation. Avoid contact with skin and eyes.
Emergency Overview:
No data.
Chronic Effects:
4 First Aid Measures
Page 1 of 3HD
Alkyl Dimethyl Benzl Ammonium Chloride 68424-85-1 < 6 N/A N/AN/A
R00
7/12/2011
CAUTION
City Of Industry CA 91746
,
Chemtel 24 Hour Emergency Response [phone]
Conforms to ANSI Z-400.1-1993
0001
Surface Safe Mildew & Mold Remover