User Manual

6
Tank (ill. h).
3. Press the Lid-opening Button on the front of the Co󰀨ee Brewer to release the top
cover and K-Cup® Capsule Puncturing Mechanism (ill. b).
4. Insert a K-Cup® capsule into the Capsule Holder (ill. d).
NOTE: Never remove or puncture the foil top of the K-Cup® capsule before
inserting into the Co󰀨ee Brewer.
5. Close the top cover of the Co󰀨ee Brewer making sure it is completely closed. The
K-Cup® capsule will be punctured on the top and bottom allowing for the ideal ow
of water during the brewing cycle (ill. e).
NOTE: If the Top Cover is not properly closed, the Capsule Puncturing
Mechanism will not lower and latch.
6. Place a mug on the Drip Tray and under the Brew Spout (ill. i).
TIP: Be sure to keep the mug in place at the end of the brew cycle to catch
any excess drips. The end of the brew cycle is indicated when the function
button is no longer illuminated.
7. Push the Capsule Brew Button (ill. j). The brew cycle will now begin. The Capsule
Button will ash during brewing and will illuminate when co󰀨ee is ready.
TIP: To stop the brewing cycle at any time, press the illuminated button.
8. When the brew cycle is complete, the illuminated button will stop and the Co󰀨ee
Brewer will shut o󰀨.
9. Do not leave used co󰀨ee capsules in the Brewer. Wait for the Brewer to cool before
removing used capsules as they remain hot following the brew cycle. Press the
Release Button on the front of the Brewer, carefully remove the used capsule and
discard. Lower the top cover.
BREWING COFFEE USING COFFEE GROUNDS
1. Place the Co󰀨ee Brewer on a dry, level and heat-resistant surface (ill. a).
2. Fill the Water Tank to the desired level from 6 oz to 14 oz according to the markings
located on the Water Tank Filter. DO NOT place any liquid other than water in the
Water Tank (ill. h).
3. Press the Lid-opening Button on the front of the Co󰀨ee Brewer to release the top
cover (ill. b).
4. Place co󰀨ee grounds into the Brew Basket. Never ll above the MAX marking on
the Brew Basket (ill. d).
5. Close the top cover of the Co󰀨ee Brewer making sure it is completely closed (ill. e).
6. Place a mug on the Drip Tray and under the Brew Spout.
TIP: Be sure to keep the mug in place at the end of the brew cycle to catch
any excess drips. The end of the brew cycle is indicated when the function
button is no longer illuminated.
7. Push the Ground Co󰀨ee Brew Button (ill. j). The brew cycle will now begin. The
Ground Co󰀨ee Brew Button will ash during brewing and will illuminate when co󰀨ee
is ready.
TIP: To stop the brewing cycle at any time, press the illuminated button.
8. When the brew cycle is complete, the illuminated button will stop and the Co󰀨ee
Brewer will shut o󰀨.
9. Do not leave used co󰀨ee grounds in the Brewer. Wait for the Brewer to cool before
removing used co󰀨ee grounds as they remain hot following the brew cycle. Press
the Release Button on the front of the Brewer, carefully remove the co󰀨ee grounds
and discard. Lower the top cover.