ME-AGS-N Manual

© 2016 Sensata Technologies 8
Installation
Figure 2-6, Connecting an AGS to an Inverter (Large)
Large Magnum inverter
ME-AGS-N
Remote
Figure 2-5, Connecting an AGS to an Inverter (Small)
Remote
ME-AGS-N
Small Magnum inverter
2.5 Connecting the AGS-N to an Inverter
• Small inverter (MM/MMS Series) – Connect one end of the
communications cable to the AGS’s RJ14 NETWORK (green)
port. Connect the other end of the communications cable to
a phone splitter, and then connect the splitter to the Remote
(blue) port on the inverter (see Figure 2-5).
• Large inverter (ME, RD, MS, MSH, MS-PE, MS-PAE Series)
– Connect one end of the communications cable to the AGS’s
RJ14 NETWORK (green) port. Connect the other end of the
communications cable to the RJ14 Network port (green) on the
large inverter (see Figure 2-6).
Phone Splitter
Connects AGS network cable
(from AGS’s green NETWORK
port) and remote cable to
inverter’s REMOTE (blue) port
Network cable from AGS
NETWORK (green) port to
inverter’s Network (green) port
Remote cable to
inverter’s Remote
(blue) port