User manual

Real-Time Counter Memory 35
You can reset the real-time counter to zero at a tape location you
want to refer to later. Make sure:
● The VCRis on and is in VCR position.The VCR/TV light will
appear. If it does not, press VCR/TV once.
● There is a tape in the VCR.
1
Play, fast forward,or rewind a tape to the location that you
would like to refer to later. Press STOP to stop the tape.
2
Press CLEAR (repeatedly if necessary) to reset the
real-time counter to zero.
• Set the counter memory at one
location at a time. Setting the
counter to zero at a second loca-
tion will erase the previous setting.
• To erase the counter memory,
press MEMORY repeatedly so the
M disappears from the screen.
• MEMORY does not function if
AUTO REPEAT is [ON].
See page 33.
Helpful Hints
2
1,4
3
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
3
Press MEMORY so M appears on the screen beside
the real-time counter.
4
To go to a tape location where the counter was reset
to zero, press REW or F.FWD when play is stopped.
When the tape reaches zero, it will stop.Press PLAY to
watch the tape.
M 0 :00 : 00
0 :00 : 00