OWNER’S MANUAL For Models: A10-205 • A10-215 Stainless Steel Gas Grill U.S. PATENTS 4,788,962 5,330,154 5,413,090 D 292,163 Other Patents and Design Patents Pending For questions regarding performance, assembly, operation, parts, or returns, contact the experts at MAGMA by calling (562) 627-0500 7:00 a.m. - 5:00 p.m. Pacific Time Monday thru Friday or e-mail us at mail@MagmaProducts.com Read these instructions carefully before use.
IMPORTANT SAFETY WARNINGS READ ALL INSTRUCTIONS BEFORE OPERATING. • USE OUTDOORS ONLY. • DO NOT USE THIS APPLIANCE INSIDE THE BOAT OR ANY ENCLOSED SPACE. • GRILLS RADIATE HEAT. CLEARANCE FROM COMBUSTIBLES, 24” SIDES AND BACK. NEVER USE UNDER AWNINGS, PATIO COVERS, ETC. • USE PROPANE GAS ONLY. FUEL STORAGE SHOULD BE IN COMPLIANCE WITH THE AMERICAN BOAT AND YACHT COUNCIL (ABYC) STANDARDS A-1 (9), MARINE LIQUIFIED PETROLEUM GAS (LPG) SYSTEMS. • FOR NATURAL GAS APPLICATION CONTACT MAGMA.
ATTACH THE LID TO THE BOWL A B C SETTING UP YOUR GRILL Mounts sold separately. See our website www.MagmaProducts.com for mounting options. Level Flat Surface 2 1 3 4 1 Select and install appropriate Magma mount in your desired location. Prior to installing the grill, check that mount does not easily move with a reasonable force applied. 2 Next, decide if gas control valve will be easier to access from the center right side or center left side of grill.
Grease Tray Pins 5a 5 Grease Tray 5c 5b 5b Threaded Burner Pipe 6 5d 5 With grill body tightly attached to L-Bracket, unthread burner 3 full revolutions only. CAUTION: DO NOT UNTHREAD MORE THEN 3 REVOLUTIONS, AS GRILL MAY FALL OVERBOARD. • Lift entire grill up to disengage from grease tray positioning pins (5a & 5b) and rotate so lid operates freely in desired position (5a). • Carefully lower back down (5d), making sure pins are re-engaged and rethreaded “burner” back 3 revolutions until tight (6).
CONNECTING FUEL SOURCE CONTROL VALVE REGULATOR •Uses standard 1-lb. disposable propane canisters (DOT-39 NRC 228/286). •Prior to installing valve, become familiar with the valve function and graphics on valve knob. Never force the knob. Always turn or push gently. •Turn control valve to “lock ” and install gas canister being careful not to cross the threads. Check for leaks prior to use, by brushing soapy water solution around threads and orifice hole checking for bubbles.
USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS • Magma On-Board LPG (Propane) Valves and Hose Kits allow Magma Grills to be installed within a boats existing on-board, pre-regulated low pressure LPG (Propane) system. • Use only Magma Type 3 Low Pressure LPG (Propane) Valves. See our Valve Application Guide at www. MagmaProducts.com for correct valve. • In North America use Magma A10-225 LPG 10' Hose Kit in conjunction with Type 3 Valve.
OPERATING PROCEDURES WARNING: Do not overheat grill. Magma grills do not require pre-heating. Stainless Steel loses anti-corrosive characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed. If medium or high heat is required, grill with lid open. LIGHTING INSTRUCTIONS • Open lid during lighting. • When igniting grill, use a long nozzle butane lighter.
MAINTENANCE Complete Disassembly for Cleaning 1 - Remove entire grill body from L-Bracket of Mount. 2 - Unthread and remove burner, Flame Deflector and grease tray from bowl. 3 - To reassemble, reverse above steps and steps 6 through 9 from page 4 “Setting Up Your Grill”. Stainless Steel, contrary to popular belief, can rust. Most commonly, deposits on the surface of the product will trap moisture. It is this moisture that robs the stainless steel of oxygen.
REPLACEMENT PARTS A10-205 A10-215 Original Size Party Size 10-253 Cooking Grill 10-353 Cooking Grill 10-466 Radiant Plate 10-467 Radiant Plate 10-657 Burner 10-657 Burner 10-258 Flame Deflector 10-258 Flame Deflector 10-751 Complete Handle Assembly & Fasteners 10-751 Complete Handle Assembly & Fasteners 10-352 Lid w/hinge & fasteners (no handle) 10-552 Lid w/hinge & fasteners (no handle) 10-558 Bowl 10-559 Bowl 10-161 Grease Tray 10-161 Grease Tray 10-164 “L” Bracket & Clamp Assembly 10-
TROUBLE SHOOTING GUIDE Problem Possible Cause Possible Solution Burner will not light No gas flow Check fuel level, replace canister or refill cylinder Obstructed gas flow Clean burner, turbo venturi tube, and valve orifice.
ACCESSORIES 9 Piece Stainless Steel Gourmet “Nesting” Cookware Magma® Marine Kettle® Grill Cover/Tote Bag Available in boating’s most popular colors Fish & Veggie Grill Tray Stainless Steel Finish or Coated with Teflon® Select Non-Stick Coatings LPG (Propane) 10’ (3 m) Low Pressure Gas Grill Connection Kit for on-board LPG (Propane) systems Low Pressure Control Valves for on-board LPG (Propane) or CNG (Natural Gas) gas systems Stores in less than 1/2 cubic foot 9 Piece Stainless Steel Gourmet “Nestin
