Operation Manual

Video recording 47
www.magix.com
ordi
tal
with an
IEEE-1394 interface (also known as FireWire or iLink) as well as an
HCI-standard IEEE-1394 host adapter for your PC. You must also
(or higher) installed.
• Connect the digital output of the switched-off camera with the
computer's DV interface (also called FireWire or iLink).
• Insert a DV cassette or the storage device into the camera.
• Switch your camera’s operating mode to "Video recorder" or
"Playback".
The camera is now ready to transfer the video to the computer.
Connect analogue video source
Connect the video out of your camcorder, or DVD/VHS recorder to
the video in (TV, video, or video graphics card) of your computer, and
the audio out to the line in of your sound card.
Due to the variety of device configurations, it is difficult to say which
cable will function best with your setup. If you’re not sure, check the
manual of your VCR or your TV, video, or graphics cards.
Video rec ng
Connect camera
Connect a DV or HDV camera
MAGIX Movie Edit Pro 15 supports continuous editing of DV (digi
video) files. You will require a DV recorder or DV camera
O
have Microsoft’s DirectX8.a
Example:
Europe: Many VCRs and DVD players have a SCART, 3 RCA (2 for
stereo sound, 1 for video), or S-Video/optical audio line out. In such
case, you will need a SCART to RCA adapter, a cable with 3 RCA
jacks, or an S-Video cable.
North America: Many VCRs and DVD players have a 3 RCA (2 for
stereo sound, 1 for video), or S-Video/optical audio line out. In such
case, you will need a cable with 3 RCA jacks, or an S-Video cable.