Installation Instructions

Figure 1
Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
or e-mail: [e-mail].
STRATTON MEDICINE CABINET
INSTALLATION INSTRUCTIONS
Model 30051
Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x 4) wall anchors - if the cabinet will not be
screwed to wall studs (for surface-mount
only) (B)
Estimated installation time: 1/2 hour
PREPARATIONPACKAGE CONTENTS
2” screws
(x 4)
24”W x 30”H x 6-1/4”D
B
B
Washers (x 4)
INSTALLATION - for recessed-mount (gures 1 and 2)
1: Determine the desired location
of the cabinet on the wall and mark
the cut-out location.
2: Create the cut-out in the wall,
as per the dimensions illustrated.
NOTE: The cabinet will need to
be secured to a wall stud on the
left and right side of the cabinet.
Install additional wall studs as
required.
3: Slide the cabinet’s back
and sides completely into the
recessed area. To secure, drill
(x 1) 2” screw with (x 1) washer
through each side of the cabinet,
((x 2) in the top half and (x 2)
in the bottom half), into the wall
studs as illustrated.
4: Attach the hardware (sold
separately) as per the instructions
provided with the hardware.
Figure 2 - Installed
5.31”
20.47”
26.57”
Cabinet (x 1)
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precautionary
measures to ensure a secure grip on the cabinet when lifting.
CAUTION:
The bathroom wall must be nished prior to installation of the
cabinet.
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing
the cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet
immediately with a clean, soft and dry cloth.