Installation Hardware List Hardware List 1 4 Table leg Table top 2 2 Long square beam Short square beam 28 4 Washer 8x16mm screw 8 1 Hexagonal screw tap spare 4x15mm Self-tapping screws 1
First connect the beams with the legs, and then fix it with 8x16mm 2 Put the table top on the table leg, make sure the reserved screw holes of the table top and the frame are corresponding, tighten 8x16mm screws to finish the installation. This is a spare screw hole. When the 8x16mm screw fails to be screwed in, the hole can be fixed with a 4x15mm self-tapping screw. Either way will do.
