Owner`s manual

33
10 Select Up and Down Buttons
These buttons provide remote selection of the various inputs of
the Nº32.
The select buttons are also used when accessing the setup menu
system in the Nº32. For more information on what you can do
with these menus, please see “Customizing Your Nº32” later in the
manual.
11 Volume Up and Down Buttons
Raises the volume at either low speed for fine adjustments or
higher speeds for larger changes. The Nº32 will slowly raise its
output for the first 1.5 seconds this button is depressed, then
move to higher rates of change.
Note that all volume and balance functions are disabled if a sur-
round sound processor “SSP” input is selected. For more informa-
tion on this special feature of the Nº32’s design, see “Using Sur-
round Sound Processors.”
12 Standby Button
As you might expect, pressing this button toggles the Nº32 be-
tween standby mode and normal operation. The Nº32 disables its
outputs and controls when in standby, but its circuitry remains
active so as to be warmed up and sounding its best at a moment’s
notice.
13 Battery Compartment
Using the supplied hex wrench, remove this casting to access the
battery compartment when it becomes necessary to replace batter-
ies. The Nº32 remote control uses two standard AAA batteries.