MH-ST-114, 312 15 : 00 1 or more estimated assembly + installation time people required 1
Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface. In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
product parts A Metal Rod B Shelf 1 C Shelf 2 D Shelf 3 4
what’s included (E)- Screw x2 (F) - Wall Plug x2 OS Orange Sticker GS Green Sticker 5
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
step 1: Place shelf (B) on a rug or cardboard and unscrew the bolts on top by twisting them anti-clockwise. See this image for reference. B step 2: Next, align shelf (B) with the metal rod (A) in such a way that the green (GS) and orange (OS) stickers on the shelf line up with their respective counterparts on the metal rod.
step 3: Insert the top of the shelf (B) into predrilled slots on the metal rod (A). Fix it in place by tightening the bolts removed in step 1. step 4: Repeat steps 1, 2, and 3 to fix shelves (C and D) in place.
installation instructions While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
step 1: Measure the distance between the two keyholes using a measuring tool. step 2: Place the measuring tool against the wall and make two marks where you want to mount the shelf.
step 3: Drill holes at the points you just marked. step 4: Using a hammer, insert wall plugs (F) inside the holes.
step 5: Fix the screws (E) into the wall plugs (F). Use a screwdriver to make sure that they are secure. E step 6: Hang the shelf by placing the keyhole slots over the screws (E).