INSTALLATION INSTRUCTIONS MG-ST-102 CARE INSTRUCTIONS Wipe only with a soft and dry cloth. To protect finish, avoid use of any chemical cleansers. Any liquid spilled on the shelf must be cleaned immediately using a damp cloth.
Shelf x 1 PARTS INCLUDED Wall Plug x 2 Screw X 2 Place the Shelf against the wall and mark the points through keyholes. Use a spirit level to ensure that the points are marked in a straight line. Drill holes at the points you just marked.
Using a hammer, insert wall plugs inside the holes. v Fix the Screws into the wall plugs. Use a screwdriver to make sure that they are secure. Hang the Shelf by placing the keyhole Your installation is complete. hangers on top of the screws.
