User manual

Hydra S2 User Guide
Be careful not to
damage any
components, and
do not force the
drives into place.
they don’t
If
slide in
roperly, make sure
e drives have
een installed in the
orrect position and
that there is nothing
out of place.
p
th
b
c
When less than 4
drives are installed,
always start from
drive A, followed by
B and then C, so
one hard drive
should be installed
at position A, two
drives at A+B and
three drives at
A+B+C. If drives
are installed in a
different position, it
will be detected as
error.
he screws by turning them clockwise.
8. Slide the hard drive cassettes back into the HDD rack and
fasten t
9. Align the bottom of the front panel with the notch in the
chassis and then push it lightly into place.
10. Unlock the switch at the bottom of the case and then
push the inner chassis back into the housing.
Page 7 / Chapter 2 - HDD Assembly