Operation Manual

4
403002-04-05-07-08-09-10_en_ma_2011
MANUFACTURER'S WARRANTY AND LIABILITY
The manufacturer's warranty covering the good functioning of the machines and
their compliance to the service for which they have been designed depends on
the correct application of the instructions contained in this manual.
The Manufacturer assumes no liability either direct or indirect deriving
from:
 Failure to comply with the instructions contained in this manual;
 Use of the machine by personnel who has not read or fully understood the
content of this manual;
 Use not complying to the specific norms currently applicable in the country of
installation;
 Unauthorized modifications and/or repairs;
 Use of non original accessories or spare parts.
 Exceptional events.
PLATES – CONFORMITY MARKS
The machines have been constructed in compliance with the European Directive
89/392 and subsequent amendments. All the parts making the machine meet the
terms of the Directive and the CE marks have been applied to substantiate this
compliance.
The plate carrying the Manufacturer's data, the machine data and the CE mark
are applied onto the machine base under the blade guard tie-rod knob.
This plate must never be removed and must always be legible.
In case of wear or damage, the user must replace it.
ENVIRONMENTAL CONDITIONS OF USE
- Temperature............................................................. from -5 °C to + 40 °C
- Relative humidity ........................................................................ max 95%