Operation Manual

12
403002-04-05-07-08-09-10_en_ma_2011
COMMANDS
START AND STOP BUTTONS
 Press the white or green button (1) to start running the blade.
 The light turns on to indicate that the machine works correctly.
 Press the red or black button to stop the blade.
Slice thickness can be adjusted by turning the graduated knob (4)
counterclockwise.
Thickness adjustment range: see paragraph "Technical description and
conditions of use”.
FUNCTIONING TEST AND BLADE ROTATION DIRECTION
Start the machine and check whether the light is on; make sure that the blade
rotates in the direction indicated by the arrow (counterclockwise if you look at the
machine from the blade plate side).
For machines with three-phase supply: if the blade rotates in the other
direction, stop the machine immediately and call qualified personnel to invert the
plug supply wires.
 Ascertain that the carriage and the product grip slide correctly;
 Ascertain that the gauge plate works and adjust thickness to desired value.