Instructions

28
SELECTING AND SAVING STATIONS MANUALLY
• Hint: Before beginning to tune in stations manually, obtain the available DAB / DAB+ stations
channel / frequency information for your area.
• Switch on the appliance.
• Press SOURCE button on the remote control or on the appliance repeatedly to choose DAB
mode. [FULL SCAN] is shown in the display.
• Press the TUN- / TUN+ buttons until [MANUAL] is shown in the display. Press to confirm.
• Now you will see 5A 174.928MHz in the display.
• Press the TUN- / TUN+ buttons to display a particular channel / frequency, the display will
show the channels from SA to 13F and the associated frequencies.
• When the desired channel is displayed, press the button and the signal strength will be
displayed. To add the channel, press the button again.
• Add additional channels in the same way and then press the MENU button to exit manual
tuning mode.
• The radio will return to the first station and the new stations will be added.
• Use the TUN- / TUN+ buttons to move through the stations available and press the button
to listen to the station.
Note: Up to 30 stations can be saved.
AUTO-SCAN AND STORE PRESET STATIONS
• Switch on the appliance.
• Press SOURCE button on the remote control or on the appliance repeatedly to choose DAB
mode.
• Press the MENU button. [FULL SCAN] is shown in the display.
• Press button and the unit starts scanning DAB / DAB+ stations around your area.
Scanning O is shown in the display.
• Once the scan is completed, the radio returns to play the previously-selected station or first
station on the station list.
• Use the TUN- / TUN+ buttons to move through the stations available and press the button
to listen to the station.
RESET DAB SETTINGS
• Switch on the appliance.
• Press SOURCE button on the remote control or on the appliance repeatedly to choose DAB
mode.
• Press the MENU button. [FULL SCAN] is shown in the display.
• Presses the TUN- / TUN+ buttons repeatedly until [SYSTEM] is displayed then press the
button to confirm, now [RESET] will be displayed.
RESET DAB SETTINGS
• Press the button [RESET N] will be displayed, use the TUN- / TUN+ buttons to toggle to
[RESET Y] and then press the button to start the reset process.
• Once the reset is completed, the unit will then automatically perform a full scan. All
previously stored stations will be lost during reset.